Crucian carp killer tackle: making it and the springs with your own hands, fishing techniques in the video

The crucian carp killer tackle is one of the most popular non-sports feeder equipment. Thanks to 3 hooks with mounted foam, the fish are self-hooking, which is not the most sporting aspect of the equipment.

In this article you will learn how to properly assemble your own tackle, prepare bait and catch crucian carp from early spring to late autumn.

Tackle structure

“Crucian carp killer” tackle can be bought in stores. It is divided into:

Silent option . Three feeder springs-feeders connected with fishing line up to 0.5 mm. Leashes with hooks are attached to springs. You can also attach additional weight there. The length of the leash should not exceed 7 centimeters.
Sliding option . The feeder is secured with a bead, and a small leash with two hooks is knitted nearby. As a rule, several more leaders can be placed above the feeder next to the stop beads. This type of gear is considered more sensitive than the first, since the biting signal is immediately transmitted to the rod. We will also discuss the manufacture of the sliding version in this article.

Voiceless variants of “crucian carp killer”

How to make a killer from Mikhalych with your own hands?

The tackle gained relevance due to the possibility of self-production. Of course, some fishermen prefer to buy ready-made ones in the store.

However, a piece of the soul is put into such homemade products and Mikhalych’s killer can be made in different ways, especially since it has already proven its effectiveness in practice, as a catchy and easy-to-use design. Use a fluorocarbon line that is invisible on the water; crucian carp will be more willing to take bait.

The principle of operation of the gear is simple. The feeder is filled with various complementary foods and mastyrka. You need to stick a hook into each lump. When the fish approaches, it will start feeding, and at this time the hook will stick into its mouth. It will be noticeable when the equipment begins to twitch. So it’s time to pull it along with the crucian carp to the shore.

To make it yourself, stock up on:

monofilament fishing line;
swivel with clasp;
hooks, depending on the size of the intended prey, swallowing the hook, for example, crucian carp, should be done completely;
a sinker with an eye;
The feeder is springy, but without loading. All equipment is mounted on a piece of braided cord up to 70 cm in length.

Attach a swivel with a sinker to the base.
Secure the knot (stopper), string the bead, stepping back from the swivel up to 15 cm.
Sand 3 feeders in this way and attach the swivel to the clasp at the end of the base.
Secure up to 7 cm of the leash with beads and a spring.
Maintain the distance between the hooks so that there is no overlap when casting.

Any bait on a hook for crucian carp will do.

Many fishermen use foam. Roll it into a ball, press it in, mix it with the feed mixture and fill the feeder with it.

To make a feeder:

copper wire in a spiral onto a metal rod ;
wind up to 12 turns , bite off the rod with wire cutters;
for the core of the feeder, use an empty core from a helium pen, and also wrap either end of the spiral around the rod. Do the same with the other end. As a result, we got a spiral with a heart inside. To fix the spring, melt the edge of the rod to obtain a flat mushroom.

Leashes no longer than 7 cm are tied to feeders. When tying them with your own hands, use thin braided fishing line up to 0.12 mm in diameter. The hook will fit 6,7, 8 numbers.

Advantages and disadvantages

The advantages include the following:

The tackle consists of 4 hooks that are located near the bait, thereby allowing you to try different types of bait and increasing the chances of catching crucian carp.
Different types of feeders can immediately feed the biting point and attract crucian carp.
The tackle allows you to fish both in deep reservoirs and in bad weather, thanks to the heavy load.
With this bait you can catch larger fish (for example, carp and carp).
The structure of the tackle is not difficult, and it is made with your own hands. And, taking into account your preferences, you can even invent tackle for different fishing methods.
Allows you to make fewer casts of the fishing rod.

Among the disadvantages of this gear are:

Poor bite sensitivity, so fishing may seem boring;
Difficulty in casting due to several feeders, which weigh down the tackle;
There are problems with replacing weights.

All of the above disadvantages cause an unsporting bite, and it is important for a good fisherman to see the fish “sitting” on the hook so that it can be caught without problems.

Disadvantages and advantages of the crucian carp killer tackle

The main disadvantages of such equipment include:

low bite sensitivity;
complications when casting gear over a long distance;
the likelihood of the feeders getting tangled.

But these shortcomings often worry only those fishermen who have recently begun to master the gear.

This gear also has a lot of advantages:

Many hooks are located in close proximity to the feeder.
A large amount of bait, which is placed in the feeders, allows you to quickly feed the casting point.
Quite heavy tackle allows you to fish in any weather.
By changing the bait and bait, you can catch not only crucian carp.
The tackle is as simple as possible, so you can make it yourself.

In conclusion, we can say with confidence that this type of gear has many more advantages than disadvantages, so today it is the most effective option for fishermen.

Making a “crucian carp killer” with your own hands

For successful fishing, you can change the design of the gear or make it yourself. Since the variety of crucian carp killer is not very different from the original, changing it does not take long. The classic tackle “crucian carp killer”, also known as “from Mikhalych”, is extremely simple to make. This is exactly what we will do.

The fishing line is chosen with a thickness of up to 0.4 mm, the sinker should be lead weighing 100 grams , as well as small hooks and several feeders. If you have sinkers, leashes and feeders, follow the following instructions:

You need to tie a weight to the tip of the fishing line.
Place a bead over the weight.
Thread a fishing line through the feeder.
The second bead must be placed so that the feeder has an outlet of several centimeters.
Place the lower stopper on the other feeder.
Do similar options for all the feeders that are available in the fishing tackle.
Tie the leashes into loops and tighten them just above each feeder.
Instead of a leash, you can use an elastic band.

Do not use beads that are too bright or of unnatural colors; they will only scare away the crucian carp. Do not make the leashes on which the hooks are attached too long. The maximum length is 6-8 centimeters, no more. Do not use double or treble hooks.

Selection of hooks

Hooks are used to catch fish and attach bait to them. The best option when using the “Crucian Carp Killer” is hooks size No. 4-6 . It will be difficult to attach, for example, bloodworms to a large hook size. Hooks with an extended shank are also used.

The hook consists of:

Forend;
Podeva;
Abalone;
Sting with a beard.

To choose the right hook, you need to know what kind of fish to hunt. But since we are talking about crucian carp, foreign companies such as:

Partridge of Redditch (English company) Owner (Japanese company) Mustad (Norwegian company);

How to choose a sinker

Depending on the location of the catch and the casting distance, you can select the necessary sinker. For shallow reservoirs, choose a sinker weighing 10 grams. If an angler goes fishing on a boat and is going to make long casts, then in this case a massive sinker weighing from 80 to 100 grams is suitable.

Feeders

One of the main roles in fishing for crucian carp is played by the feeder. A self-respecting fisherman always has several feeders of different shapes, because you can never say exactly what the fishing conditions will be.

The shape of the feeder is chosen depending on the depth of the reservoir. If the water is stagnant, then the shape of the feeder is not so important, but where there is a current, a rectangular or triangular feeder will do.
The amount of bait should correspond to the size of the feeder. If the angler does not want the fish to immediately become satisfied with food from the feeder while fishing, then smaller structures should be used. After all, when the crucian carp eats all the food, it will not want to play with the bait, and the crucian carp will swim away in search of new food.
Weight depends on casting and river flow. 50 grams of food gets soaked in water and increases its weight.

What kind of bait can be put in the feeder?

breadcrumbs;
boiled peas;
pearl barley or semolina;
bread crumb;
dung worms or maggots;
It is best to add the strong smells of garlic, anise or mint to the food.

Line selection

An important choice in equipment equipment is fishing line. Equally important are the conditions of the fishing spot. Experienced fishermen prefer the following types of fishing line:

Braided fishing line guarantees its quality. The thread does not stretch, and the feeder tackle becomes more sensitive.
The advantage of monofilament fishing line is its safe use in reservoirs with a rocky bottom. But the previous analogue will most likely cling to both stones and snags. Example of braided line Modern monofilament line (structure)

The second version of the fishing line does not allow the caught crucian carp to escape and suppresses all its resistance. With the help of such a fishing line it will not be difficult to catch a large specimen.

Leash

The leader connects the hook and line. No fishing for crucian carp is complete without a leash. By the way, you can make up to 5 of them.

Universal leashes, as a rule, perform the following functions:

Make the tackle invisible to the fish;
They preserve the float and sinkers when the hooks of a large specimen of fish are “empty”;
They help the bait behave easier in the pond.

The design of the leash itself largely depends on the fishing. If the leash is long or short, the fish may not bite. The thickness of the line also affects the design of the leash.

A leash with a monofilament line is suitable for a float rod. In this case, the hook and bait will remind the fish of its food. When a large fish bites, the line will soften the jerk. But there is also a drawback of this fishing line: it quickly breaks down. But braided fishing line is better suited for a leash on a bottom fishing rod. Fishing will seem reliable, and the fishing line will be strong. The disadvantage is that the fish easily sees the braided line and can simply swim past without being tempted by the bait.

Therefore, what fishing line to make the leashes from will depend on the fisherman. Long or short leashes suit some people.

The length of the leash can be selected according to the following indicators:

up to 30 centimeters for a float rod;
from 40 to 80 centimeters for classic donka;
up to 6 cm at the crown.

Using a short leash, the crucian carp will easily feel the resistance of the tackle and swim away, but with a long leash, the bite may not be noticed at all.

Watch the video of fishing with the “crucian carp killer” tackle:

Review of popular models of crucian carp killer tackle

There are quite a large number of variations of these tackles, but everything directly depends only on the type of spring and the size of the hook. The main types of springs can be:

barrel-shaped,
cylindrical,
longitudinal,
transverse.

Everything directly depends only on the area in which the fisherman is going to catch crucian carp.

If there is a lot of algae and mud on the bottom, then cylindrical or longitudinal gear is best suited, since they will cling less to the vegetation, and accordingly, it will be much easier to pull out the fish.

But on an empty bottom, you can safely use barrel or transverse types of gear, because they hold more bait, and accordingly, you can avoid clogging the feeder longer.

Improvement options

To make the equipment more sensitive and catch as many fish as possible, you need to follow the step-by-step instructions:

Take a nylon thread about 50 centimeters long.
Tie the swivel to the thread.
Tie a bead at a distance of 8-10 centimeters.
Thread the smaller swivel and put on a new bead.
Repeat inserting the bead and swivel several times.
Attach a more powerful swivel to the other end.
Tie leashes of different lengths through the loop into the swivel.
Tie hooks between the beads.

After preparation, you can hide the tackle in a container and get ready to go fishing.

How to increase the catch of crucian carp?

To catch more fish, you can purchase various types of bite activators, which contain special pheromones. Any fish will actively take on such substances in any weather conditions and at any water temperature.

Unfortunately, today such means are prohibited, so you will have to think additionally about ways to attract fish.

You can add special additives to the bait that stimulate a strong appetite in the fish. For now, they can be purchased in fishing stores - the most effective among them is the American product FishHungry.

Bites will occur much more often if you place at least two hooks on each spring. If the fish does not take hook number 7, then it can be replaced with number 5 . This may be due to the fact that a smaller fish has approached and cannot swallow the hook. This usually helps a lot in getting the fish to bite again.

Conversion of the “Crucian carp killer” tackle into a more sensitive and catchable one

In principle, it is not too difficult to slightly alter such gear so that it becomes more sensitive.

It is enough to perform a number of actions:

The load is not attached immediately behind the last feeder , but much further - at least half a meter. The weight is chosen depending on the reservoir: in standing water 20 grams is enough, and in a strong current this figure can reach 300 grams;
The stop bead is located close to the sinker;
It is advisable to place a sliding bead that will hold the feeder, and do this so that it is located between two locking elements: they are placed at a distance of 10-15 cm from each other. This way the feeder will move freely over a certain distance.

These simple actions will allow you to feel the bite much better and react faster to the caught fish, preventing it from jumping off the hook.

Other variations of the “crucian carp killer”

Other gear for catching crucian carp can be used:

"Nipple" based on a spring feeder.
A stopper from a regular plastic bottle or canister.

These tackles are equipped with hooks and filled with rich porridge made from pearl barley, semolina or oatmeal. The hooks themselves must be hidden in the mess.

You can install other types of “crucian carp killers” yourself, using your imagination and desire to make things. It is only important to be patient. For those who do not show any particular desire to build their own tackle, you can always go to the Hunting and Fishing store and pick up what you need there.

"Nipple" for crucian carp and crucian carp

One of the most sensational methods of catching crucian carp with tackle in recent years has become the spring “nipple”. The nipple is a modernized variation of the “Crucian Killer”.

In order to make a “pacifier” for crucian carp, you will need the following material:

Hooks;
Wire;
Cord made of nylon fabric;
Carbine.

To make it, you must perform the following steps:

Place a stopper on the tip of the fishing line;
Mount the spring feeder;
Place another stopper, leaving a free space of 5 centimeters;
Tie the swivel and carabiner;
Then tie one leash to the carabiner and two to the top of the feeder.

In order to catch crucian carp on a “nipple” you will need:

A rod 2-2.5 meters long with a cast of up to 50 centimeters;
Coil without inertia;
Long cord;
Leashes made of braided fishing line 20 centimeters;
Hooks series No. 4-6;
Spring "nipple";
Bell.

Before throwing the “pacifier” into the pond, all the hooks will need to be hidden in the porridge. The principle of operation of the “nipple” is similar to the classic “crucian carp killer”.

Cork

Another tackle that fishermen use when catching crucian carp is called a “cork” . To build such a tackle, you need to perform the following steps:

Take a cork from a plastic bottle or canister;
Make several holes in the cork where small leads are inserted;
Attach hooks to leashes;
Tie a fishing line to the cork.

The cork will serve as bait for the crucian carp, and when it begins to absorb food, it can be hooked.

Lure

The lion's share of success when catching killer crucian carp depends on bait. It should attract fish well, and be viscous enough to stay in the feeder for a long time.

The ideal bait for this rig is fishing clay. It comes in different tastes and smells. You can choose the one that best suits your fishing conditions.

You can also use dough or mash made from semolina and peas as a filler for the feeder. How to make them yourself is described in detail in the article.

You can use the following flavorings for the dough:

honey,
vanillin,
anise,
fragrant sunflower oil,
cinnamon,
cocoa,
ground cake.

I also recommend adding attractants to the bait. They work much more effectively than flavoring agents because they attract crucian carp not just by smell, but by pheromones - substances that excite the nervous system of the fish.

Unfortunately, many attractants are dummies; they contain nothing but ordinary flavors and taste enhancers.

But there are exceptions. For example, FishHungry.

This is a real bite activator, which contains pheromones.

Crucian carp finds bait with FishHangry much faster, and eats it with greater greed than mixtures with conventional flavors.

[video_lightbox_youtube video_id=»6aIWBi5lj-A» width=»800" height=»450" auto_thumb=»1"][video[video_lightbox_youtube video_id=»7k5GfaFHCpo» width=»800" height=»450" auto_thumb=»1"] _light[video_lightbox_youtube video_id="tNDC7t95CZE" width="800" height="450" auto_thumb="1"]feeder and attachments

To make fishing successful, experienced fishermen advise using viscous bait. You can add scalded rolled oats or semolina to it so that all the food does not spread across the surface of the water, but flakes off in pieces.

When using crucian carp killer gear, you can experiment with baits and baits. For this we collect:

worms;
dough;
cereal;
maggots;
corn;
semolina;
bread.

Any thick porridge or hominy is most suitable.

Pieces of foam plastic are suitable as attachments. The crucian carp will not be able to swallow such a bait, but it will easily fall on the hook. Boilies attached to hooks are also used.

Store

Many fishermen opt for commercial bait for crucian carp. It has some advantages compared to homemade:

The composition of the feed is more balanced and suitable for crucian carp;
Store-bought bait is moistened;
A store-bought mixture will save anyone’s precious time.
Not everyone can be happy with the price

Premium Dunaev
The most famous fish baits entering the market are companies such as:

GreenFishing Traper Lin-Karas

Homemade

To attract fish, you should make sure that the bait is of high quality, has a smell, and is liked by the fish. To prepare such bait, the following components must be observed:

Semolina;
Millet;
Peas;
Oatmeal or rolled oats.

Using the ingredients at hand, you can build a good bait for crucian carp, while saving money.

Recipe No. 1. You will need 1 kilogram of crushed wheat or barley, 200 grams of semolina and corn flour, as well as salted cake. Stir everything, adding water, then put in the refrigerator for 5-6 hours. You can make balls from the finished solid mixture.
Recipe No. 2. Half a kilo of breadcrumbs and roasted seeds, 5 tablespoons of sugar and 30 vanilla crystals. The cooking process is the same.

To increase the bite, you should add the following flavorings to the bait, without which the crucian carp will bypass any food:

Orange juice;
Anise;
Cocoa;
Grated dill seeds.

But it is also worth remembering that even though crucian carp is an omnivorous fish, it chooses its own preferences, which cereals to eat and which mixtures to choose. The weather plays an important role, so any fisherman will never be able to guess how the crucian carp will behave on a given day.

Fishing Features

The main secret of success is the correct complementary feeding. Mastyrka works well, sometimes barley rolled out with a rolling pin or store-bought corn for flats. It often takes time to learn how to prepare good bait for a given pond, especially homemade bait.
When filling the spring, the bait should not be close to the coils, but there should be a “fur coat” of about a centimeter of feed around it. This will make the feeder heavier, allowing you to cast long distances, and will increase the feed trail, which the crucian carp senses from afar.
When fishing, they try to stick hooks into different parts of the spring. In this case, even if it turns over on the wrong side, or sinks too deeply into silt or algae, at least one hook will be on the surface.
You need to check the tackle approximately every hour, regardless of whether there were bites or not. During this time, the spring or plug will have time to free itself from the bait.
If the catch is successful, you need to repeat the cast to the point where the bait was before. In this case, clipping and remembering casting guidelines can be useful. When a lot of fishing rods are abandoned, it can be convenient to write them down or even sketch them in a notebook.
Usually the “crucian killer” does not have the goal of feeding the fish. Therefore, if a successful point is found where fishing is taking place, it makes sense to remember it and feed it separately in the future, with a special spod rod.

Fishing technique

After the tackle and bait are ready, you can start fishing. But first of all, you should learn about fishing techniques.

Check the bottom of the reservoir. To do this, you need to throw a weight without hooks and find out if there are any possible holes or irregularities.
Hang the tackle on the rod and fill the springs with bait.
Throw a little fertilizer into the water.
Throw the “crucian carp killer” tackle into the pond. When casting, you should move the rod back a little, then you need to move the rod a little so that the tackle smoothly sinks to the surface of the reservoir.
Place the rod on the supports and let the sinker touch the bottom. Then set up a bite alarm.
The cast should be repeated every 20 minutes.

Thanks to this fishing technique, not a single fisherman has ever complained about the lack of a bite. Therefore, you should safely use it, so as not to embarrass yourself later in front of your colleagues, who may also have gone fishing.

How to throw?

Before you start fishing, you need to choose a fishing spot.
Then fill the feeder with the bait that crucian carp like so much and throw it into the water using a slingshot. You need to take into account that the “crucian carp killer” tackle will be heavy, so you should cast smoothly. When the tackle touches the bottom, you need to:

Pull up the fishing line;
Fix the rod;
Build bite alarms.

If the fish does not bite for some time, you should cast again. Supposedly, you need to cast the tackle every 20 minutes. It is best to change baits periodically to attract more fish.

Features of use

During each fishing period, fishing professionals advise using their own food. Fish have their own feeding habits at any time of the year. And the bait, which is made independently, can work regardless of bad or good weather.

In spring, soil should be added to the bait. It must be obtained from the reservoir where the fishing spot is planned. The dried and sifted soil should be mixed with bloodworms and the whole thing wrapped in gauze, dividing the fish food into balls. You can also mix millet with chopped worms.

As a summer bait, and depending on the appetite of the crucian carp during this period, it will be to use a plant-based feed composition with the addition of flavorings. The simplest ingredients are:

Roasted sunflower seeds;
Breadcrumbs;
Powdered milk;
Cereals;
Semolina;
Sugar;
Cocoa;
Vanilla.

They are used to prepare ordinary mastyrka, which is similar to dough.

In the fall, crucian carp will need protein products in their food, namely:

Bloodworm;
Food for aquarium fish;
Dried daphnia.

You can make as many baits as you like, and it is always advisable to add strong smells to them to attract crucian carp.

How to catch killer crucian carp

This gear is used to fish according to the principle of wait-and-see tactics, similar to the strategy of bottom feeder fishing. The place on the shore should be open, with the ability to easily catch prey. After a targeted cast, the rod is installed on a stand and equipped with a bite alarm.

What to use as bait

When fishing for crucian carp, the same baits are used as when fishing for carp with a regular fishing rod:

maggots;
worms;
bloodworm;
semolina;
dough;
barley;
corn;
bread pellets;
pea mastyrka.

Recommended reading: Catching bream in winter with a rocker

If the reservoir is silted, then a foam ball is attached to the bait, which gives it buoyancy. If the crucian carp bites quite actively, then polystyrene foam is used as an independent bait, especially flavored one.

Choice of bait

Bait can be purchased in finished form (starter feed) in fishing stores. The fisherman just has to dilute it with water and throw it into the fishing spot.

A good option would be bait of plant origin, prepared with your own hands:

pearl barley;
peas;
cake;
wheat.

The main condition is that the bait should not disintegrate quickly. To do this, you need to boil it well. Can be mixed with semolina or food plasticine.

Fishing technique

The technique of catching crucian carp killer is similar to traditional feeder fishing:

A sinker without hooks is used to check the bottom for holes and irregularities.
Feeding is thrown into the intended fishing location.
Spring feeders are clogged with bait.
The tackle is thrown into the fishing spot. Immediately after casting, the rod is pulled back a little, so the equipment will smoothly sink to the bottom.
The rod is placed on a stand and a bite alarm is put on it.
The cast is repeated every 20 minutes.

This tactic has never left a single fisherman without a catch.

Fishing at different times of the year

Given the activity of crucian carp, they can be caught in the morning and evening hours of the day. Everything will depend on their desire to eat. Weather is also an important factor when fishing for crucian carp.

After the ice melts , crucian carp will become active for only a couple of weeks. In summer, a good bite is observed either at dawn or at sunset. If the weather is clear and warm, bites can be expected during the daytime. Those who are used to participating in night fishing on a boat and with a bottom fishing rod will be able to catch large crucian carp.

Spring

Fishing for crucian carp in spring is divided before and after spawning. It is strictly forbidden to use bait during this period. After spawning, bait will be needed in large quantities so that the fish stands in place. Fishermen throw balls in the form of mixed food from bloodworms, worms and maggots into the water to attract more crucian carp. If the bait is flavored with pungent odors, you can wait for crucian carp on the prepared hook.

In March and April, water temperatures are still low, and crucian carp will be inactive during these months of the year. But in mid-May, after spawning, when the water warms up to 15 degrees Celsius, the fish become more active and the bite will take its course.

Summer

From June to August , crucian carp prefers plant foods, so thick porridges with flavors are perfect as bait for crucian carp. In order not to overfeed the fish, you should first use half of all the prepared food, and then throw balls for crucian carp into the pond every 20 minutes.

During the summer months, crucian carp are overly active, thanks to digestion in warm water. The diet for crucian carp is suitable for:

bread crumb;
millet, oatmeal, oatmeal, semolina and other types of porridges;
dough with added pungent odors that attract crucian carp.

Autumn

When the water temperature drops, crucian carp switches to animal food. Even in September, the water remains quite warm, so the fish will be active at any time of the day. And with the onset of October and November, complementary feeding should be done in small quantities due to the low activity of the fish.

Making bait

Pour the bait base into the container and mix it dry in advance;
Then fill the bait with water from the reservoir , after mixing, let the bait brew, and then sift through a sieve;
Add the pre-prepared filler to the container and mix again;
Then we add soil from the same bank, from the same reservoir. The bait is thoroughly mixed. And then it should brew.