Crucian carp killer tackle: installation and how to make the equipment yourself

This type of gear appeared relatively recently, but experienced fishermen have already appreciated the advantages of this design. It cannot be classified as a sport one, since the bite signal is practically not transmitted to the tip of the rod., its structure is such that the fish is hooked on its own.

What does crucian carp killer tackle look like?

Externally, the crucian carp killer is something similar to a tram of three cars: instead of them there are three springs, as well as several hooks located on one single base. A feeder with leashes is attached to the springs.

In principle, you can install one feeder or several at once - it all depends on how many fish a person is going to catch, as well as on his fishing skills. If you master this type of tackle well, you can catch up to five fish in one cast.

You can find similar gear on sale in two key varieties:

Blind type - here a fishing line is used, the diameter of which should be from 0.3 to 0.5 mm, to which from one to five feeders are sequentially attached (you can find five pieces, but most often three pieces are installed). The feeders themselves are of the spring type; they can be taken either loaded or not. If they are not weighted, then a very heavy sinker will need to be attached to the end of the tackle, the mass of which should be about 250 grams. Two or three leashes are attached to each feeder, the length of each of them is 4-7 cm. The hooks are not too large, designed specifically for crucian carp;
Sliding variety - only one feeder is used here, which is installed at the very end of the tackle. Behind it is a swivel, protected from slipping with the help of a safety bead. Leashes with hooks are attached between the bead and the swivel. The sensitivity of this gear is much higher, since the signal of a perfect bite is immediately transmitted to the rod.

Today in fishing stores you can find a variety of versions of this gear, which will differ from each other due to the diameter of the fishing line used, the number of leashes, feeders, rocker arms, and various kinds of bends made of stainless metal.

How to choose a sinker

The sinker is selected based on information about the fishing conditions. If it takes place in a place with shallow depth and does not require long casting, then it is enough to use a sinker weighing around 10 grams. If the fishing location is chosen further and deeper, then the weight of the load must be increased to 100 grams.

It is known that one of the most favorite baits is a worm. To make the crucian carp killer work as successfully as possible, you can use several tricks. They will make the worm a more desirable treat. To enhance the aroma, elasticity, and vitality, you need to add fresh milk and fresh herbs to the worms in a jar before fishing. Adding garlic and dill to the worms will give them a special flavor. You need to add a little, otherwise the garlic will kill the bait. If you use a part of the worm for bait, torn off just before baiting the hook, the smell will attract fish more strongly.

Article on the topic: Bait for crucian carp

How to make a killer from Mikhalych with your own hands?

This tackle has gained wide popularity largely due to the fact that it can be easily made independently from scrap materials. The likelihood that a hand-made tackle will turn out to be very catchy is quite high. Moreover, it has already managed to repeatedly prove its effectiveness.

The principle of operation of the crucian carp killer is quite simple: bait is filled into the feeder, and a hook with a thin fishing line will need to be inserted into each piece. The approaching fish will begin to feed, at which time the hook will enter its palate or lip. The crucian carp, trying to throw it off, will begin to rush, which will be instantly noticeable by the movement of the rod.

To make such a tackle yourself, you need to take the following materials:

Monofilament line , made from nylon or fluorocarbon;
Swivel g, equipped with a small clasp;
Certain size hooks . Their size will depend on what kind of fish you plan to catch. It is worth noting that the crucian carp must completely swallow the hook, otherwise it can easily break off during hooking;
Sinker having a small eye;
Springy feeder , which is not equipped with additional weights. All tackle will be assembled on a braided cord, the length of which will be about 70 cm.

The production technology of this product is as follows:

A swivel and a sinker are attached to the base of the tackle
Install a stopper after the swivel , and you need to retreat at a distance of about 15 cm;
Next, install the required number of feeders . If a fisherman has just started mastering this gear, then it is best to install no more than two feeders, and ideally start with one. This will allow you to better understand the operation of the gear;
After this, it is necessary to attach leashes to the tackle , and a certain distance must be maintained between them so that during casting they do not overlap each other.

The crucian carp will be more willing to bite if the fishing line is as inconspicuous as possible. You can hang any bait on the hook itself. Even a piece of polystyrene foam is perfect - roll it into a ball, coat it with complementary foods and hang it on a hook.

Springs that make up a feeder can be made from the following materials: take a steel bar and wind a rather thick copper wire around it in a spiral. 10-12 turns are quite enough . For the central part, you will have to take the rod from a gel pen, where the ends of the spring are inserted.

Types of equipment

If we do not take into account some intricate homemade designs, then we can say that there are two main options for mounting a crucian carp killer: blind and sliding. Let's look at them in more detail:

Blind equipment. Outwardly it looks like a garland in which all the elements are connected by a braided cord or thick fishing line and arranged in one row. The spring feeders in it are fixed with the help of locking beads, each one is in its place. To prevent them from getting tangled with each other during casting, a sinker is installed at the end of the fishing line. The load must be heavier than the feeders. In flight, it stretches the garland, preventing the springs from catching on one another. A carabiner is attached to the opposite side of the structure to connect to the main fishing line. Each feeder is equipped with a short leash with a hook. As a rule, the length of the leashes does not exceed 4 cm; with longer ones, the fish will be worse to detect.
Sliding equipment. This installation of a crucian carp killer involves the use of only one feeder, but of a larger size. It also serves as a sinker. The movement of such a spring along the fishing line (cord) is limited by two stop beads or a bead and a swivel at the end of the rig, to which the leashes are tied. To prevent them from getting confused, it is advisable to add to the design an element such as a rocker (a mustache made of thin metal wire).

Advantages of a crucian killer

This gear has a lot of positive qualities.

Here are just a few of them:

Fishing is carried out using several hooks at once , which immediately increases the likelihood of catching fish. Moreover, they are quite close to the bait. Several hooks allow you to use several types of bait at once, which will help you very quickly determine the taste preferences of the fish at the moment;
Feeding with several feeders allows you to attract fish very quickly, which means that they will bite much earlier;
fish with this gear in any weather conditions, including rain and strong winds. Its significant mass allows it to be accurately thrown into a certain area of the reservoir even in strong gusty winds;
You can use quite a lot of bait , and this tackle is versatile. It is also used for catching crucian carp, bream, carp, carp and a number of other peaceful fish.

If you make this tackle with your own hands, you can take into account your own preferences, take into account the characteristics of the reservoir and a number of other features of fishing in a certain place.

What is the crucian carp killer tackle: design and principle of operation

In most cases, fishermen who practice fishing exclusively with donk prefer to use gear called “crucian carp killer” from their numerous arsenal.

The thing is that when using it, the fish have practically no chance. A simple but very effective design allows you to hook not only crucian carp, but also replenish your catch in the cage with carp.

Tackle design

This tackle does not belong to sports options, since fish will constantly bite on such a simple design .
IMPORTANT! With this type of gear, you can use the thinnest rod in your arsenal, since when biting, minimal forces are transferred to the tip of the rod.

Fishermen use the sliding version as the main design, since this way they can better feel the bite and manage to hook the crucian carp in time. These are several small spring-type feeders that are attached to a fishing line in a sequential direction.

A small leash with a hook extends from each of them (there can be several such leashes to increase efficiency), and at the very bottom, a lead weight is installed at the very bottom to weigh down the tackle when casting.

Operating principle of the gear

The basic principle of operation is as follows:

The feeder is filled with special bait or porridge prepared independently, so the ever-hungry fish swims closer to enjoy the treat.
Having tried the bait, the fish will be glad to see a worm or other bait on the hook, since crucian carp is a predator.
After the fish swallows the bait, it will be very difficult for it to drag all the gear along with it, so it won’t take long to pull its prey out of the water.

Today you can buy such tackle in almost every fishing store, so there will be no problems with this.

Disadvantages of equipment

Despite the fact that the crucian carp killer has quite a lot of positive qualities, there are also some negative characteristics. First of all, this concerns the low sensitivity of the gear, especially when there are several feeders.

This figure can be greatly increased, largely thanks to the assembly of the sliding structure, since the signal will be transmitted directly to the rod.

None of the fishermen is immune from such an unpleasant moment as the overlap of leashes during casting. To prevent this from happening, during the manufacturing process of this gear you will need to carefully measure all available distances .

The product is quite heavy, so you won’t be able to use a standard feeder rod. It is much more convenient to take a donk, since its strength will be quite sufficient to withstand the weight of the tackle, as well as a fish of considerable weight that has bitten.

Good to know

If the mass of the springs performing the function of feeders is approximately the same, then you should not install a sinker after each of them. It is hung only after the last feeder. This will allow you to prevent the gear from getting tangled during fishing so that it lies fairly evenly on the bottom of the reservoir;
Each feeder needs to be fed with different complementary foods . Due to the fact that the taste preferences of crucian carp change from day to day, the chances of attracting it are becoming greater;
The bait should not become too soggy in the water , therefore, when making it, you need to add as many binders as possible. In particular, a certain amount of clay from the banks of the reservoir where fishing will be carried out, or rolled oats, is added to the mixture;
When assembling the tackle, it is advisable to make as few knots as possible, otherwise the design will turn out to be quite weak.

How to increase the catch of crucian carp?

To catch more fish, you can purchase various types of bite activators, which contain special pheromones. Any fish will actively take on such substances in any weather conditions and at any water temperature.

Unfortunately, today such means are prohibited, so you will have to think additionally about ways to attract fish.

You can add special additives to the bait that stimulate a strong appetite in the fish. For now, they can be purchased in fishing stores - the most effective among them is the American product FishHungry.

Bites will occur much more often if you place at least two hooks on each spring. If the fish does not take hook number 7, then it can be replaced with number 5 . This may be due to the fact that a smaller fish has approached and cannot swallow the hook. This usually helps a lot in getting the fish to bite again.

Conversion of the “Crucian carp killer” tackle into a more sensitive and catchable one

In principle, it is not too difficult to slightly alter such gear so that it becomes more sensitive.

It is enough to perform a number of actions:

The load is not attached immediately behind the last feeder , but much further - at least half a meter. The weight is chosen depending on the reservoir: in standing water 20 grams is enough, and in a strong current this figure can reach 300 grams;
The stop bead is located close to the sinker;
It is advisable to place a sliding bead that will hold the feeder, and do this so that it is located between two locking elements: they are placed at a distance of 10-15 cm from each other. This way the feeder will move freely over a certain distance.

These simple actions will allow you to feel the bite much better and react faster to the caught fish, preventing it from jumping off the hook.

Fishing with CRUCCIAN KILLER tackle from Mikhalych All episodes in one video

VKTwitterOK

video content

Rating: 4.0;
Votes: 1 Fishing with the KILLER CRUCCIAN tackle from Mikhalych All episodes in one video Lydia Slyusar: Neither tail, nor scales We are now our own, And we fish with you Perch and catfish.
We look forward to meeting today, pike, crucian carp, and all the fish make us happy. We miss her for your fishing, Let Seryoga come and help with fishing. It’s more fun together. We go to lunch and eat lard together. It’s not enough for us. It smells like borscht, shish kebab. We were so attracted to lunch, we are glued to the screen. We want to have dinner with you. At night we watch and don’t sleep. Again we eat with you, gaining weight, either for dad or for mom. May God give you a catch. You are a welcome fisherman, we say thank you. May the burbot, pike, and perch cling to them. May they all be joyful. Rokitnaya - Slyusar Lydia. Visit my website with poems. Date: 2019-08-27

← Opening of the season on the predator from Mikhalych Testing the cheapest edible food Fanatic

Fishing from Mikhalych Mikhalych returns Catching a predator →

Reviews

A very catchy tackle , and it can be assembled from any available materials. The technology of use is not too different from a traditional feeder rod, but you can catch significantly more fish with it (Alexey, 24 years old);
It is very easy to use this equipment . As complementary food I used ordinary fishing clay, to which I added a small amount of rolled oats. In a couple of hours we managed to catch a dozen and a half crucian carp. In addition to them, two carp and four bleaks bit. For a beginner, the catch turned out to be quite decent, I plan to go fishing again with this gear (Peter, 38 years old);
This tackle cannot be classified as sports , but with its help you can catch simply a huge amount of fish. The main thing is not to hang too many hooks, otherwise you will have to untangle the gear more than actually do fishing (Igor, 32 years old).