ᐉ Choosing a spinning rod for a multiplier reel

Currently, the range of spinning rods available for purchase is very extensive. But at the same time, there are very few models that were developed specifically for fishing in our natural conditions. In this regard, domestic spinning anglers use various methods to adapt imported fishing rods for fishing in our reservoirs.

Thus, to effectively use a modern baitcasting reel, the selection of a special spinning rod is required. The main feature of such a spinning rod is the “upper” position of the reel, which in turn affects the location of the guide rings and the length of the handle, and also requires a specially shaped reel seat. However, there are other characteristics that should be taken into account when selecting a fishing rod for a multiplier.

In general, spinning rods can be divided into three main groups: those that are designed exclusively for working with a multiplier; rods for use with a spinning reel; universal models.

The intended purpose of the spinning rod depends on which of the three groups a particular rod belongs to. For example, looking at the assortment of the G. Loomis company in the “Musky Series Rods” section, you can see that all the rods are designed for fishing using multipliers. This is due to the fact that these models were created as fairly strong and powerful tools for catching large and strong predators, and therefore the characteristics of the multipliers in such conditions are very appropriate.

At the same time, a number of longer rods for long-distance casting are equipped with special fittings and are intended for use in conjunction with spinning reels.

Build rods

It's no secret that all modern fishing rods are characterized by a specific level of elasticity, which is determined by two parameters: action (the shape of the blank bending under a static load) and action (the speed at which the blank returns to its initial position). In the USA, these parameters are combined into one called “Action”. For example, rods marked “Action Fast” have fast action.

But still, there are no completely ideal products, and this also applies to spinning rods. Therefore, when purchasing, you have to lean towards a more important parameter and make a choice taking it into account.

Let's say you are interested in the capabilities of a rod in the context of casting. The main factors here are range and accuracy. Regarding accuracy, it is worth saying that to a large extent it depends not so much on the rod, but on the skills of the fisherman and the convenience of the conditions in which he is located.

But in terms of range, the action of the rod plays a significant role, that is, its ability to impart maximum initial flight speed to the bait used. The structure of the rod has a greater influence on the accuracy of casting and its overall success.

For normal operation of a baitcasting reel, a certain spin of the spool is required. Different models are characterized by different moments of inertia, and therefore when choosing a fishing rod you should definitely take into account what type of reel you will use. Perhaps, baitcasting reels require the most careful selection of fishing rods.

There is a rule that states that it is necessary to use a fast multiplier with a fast spinning rod. Since the fast action of the rod is very important when fishing without the possibility of a normal swing, the reel should also have an extremely lightweight, small spool.

Design and technical characteristics of castings

Multiplier gear, like classic ones, is designed for hunting predatory fish using live bait or artificial bait. A baitcasting reel with fishing line or cord is attached to the rod. But the main feature of casting is that, unlike a classic spinning rod, where the rod plays the main role and the casting distance depends on it, in a multiplier spinning rod, good fishing depends primarily on the multiplier reel.

The main components of multiplier spinning

This:

• A fishing rod, the main difference of which is that the “whip” has an additional element - a trigger, which secures the hand during fishing. Grasping the rod with your hand occurs in such a way that in addition to the “whip”, the angler’s hand also contains a multiplier reel. Rods can vary in the number of rings on the blank, as well as their sizes. The number of rings on cartoon fishing rods is greater than on classic spinning rods. This is due to the specifics of casting with a multiplier spinning rod.

• The multiplier reel, which is the main element of the casting spinning rod, is essentially inertial. The spool is located across the reel. The design of the multi is simpler than that of a classic “meat grinder” for spinning, but at the same time there are more features in working with it.

Casting reels have two types

• Barrels that are used for jigging. Often these reels have a line counter installed. These are powerful reels that are also used for catfishing, so the “barrels” are quite bulky and heavy, not very comfortable to use.

• Soap boxes, the most popular type of baitcasting reel. Soap dishes are used for fly fishing. This type of casting reel is used for both light and heavy weights.

The casting range in casting fishing primarily depends on the bait reel. You should choose the right reel for the type of bait it will interact with. You should select the correct test weight of baits that matches the spool.

Also important when choosing a reel is the type of brakes.

. There are several types of brakes:

• Axial type of brake, the correct adjustment of which allows you to avoid “beards” when casting.

• The centrifugal braking system is best suited for bulky types of bait such as wobblers.

• Magnetic brake system is the best option for jigging. The braking system is designed to work best at high speeds.

Some manufacturers combine braking systems in one reel, but it is still better to select the appropriate braking system for each type of fishing.

Daiwa animators

Products from this brand are very popular. Multiplier reels for Daiwa spinning rods have long been used by fishermen. This company never ceases to delight its customers with new products and high quality products for many years.

The Daiwa product range is diverse, so it can satisfy any wishes and preferences. The devices in question produced by this manufacturer have a soft ride and excellent design.

Some fishermen note that multiplier reels for Daiwa spinning rods contain elements made of plastic. However, it is not durable. As a result, some coils fail quite quickly. Also, the negative characteristics of Daiwa products include high cost. Many people cannot afford reels from this company.

In all other respects, this is an excellent fishing tackle that will allow you to go after the largest prey.

Advantages and disadvantages

Advantages of fishing with a multiplier:

When fishing, the reel is located directly in the palm of your hand. The tackle is more balanced and sensitive, in comparison with the inertialess one;
small total weight of the spinning rod set, about 300 grams;
the spool is close to the blank, the rings are set low;
ease of manipulation with wobblers;
the line does not twist, as it goes straight to the spool;
casting range does not depend on the thickness of the fishing line;
working with baits of different weights.

Disadvantages of fishing with a baitcasting reel:

price;
time to master casting techniques;
fishing with ultralight baits is not as effective as inertialess bait;
relatively low speed of winding the line onto the spool;
impossibility of use at temperatures below zero.

Read: Spinning reel

Methods of fishing with casting spinning rod

The methods of fishing with casting spinning rods generally do not differ much from simple ones. The basis of this fishing is throwing the bait into the chosen place. After casting, all gear units are put into operation. The fisherman holds the blank at an angle to the water and uses the reel to move the bait.

Now the wiring begins.

A special feature of casting with a multiplier reel is the automatic braking, which prevents the line from twisting. And the flight is stopped with a finger touching the coil drum.

The easiest way to learn casting is with jig heads and use light jig spinning rods.

Methods of casting bait

pitching is a cast from under oneself, its length is up to 15 meters;
rollcast, casting only with the tip of the rod, only one tip in operation;
flipping, precise casting with a short rod.

One of the most important factors in successful fishing with good castings is retrieve - leading the bait in the water. It consists of complex actions of the fisherman. During wiring, you must carefully hold the form, be able to move it correctly, and work with the reel.

Some wiring rules:

the whip should be held at an angle of 45 degrees to the horizontal;
this angle can change, but the rod should not be in line with the fishing line;
The line must not be loosened, otherwise contact with the bait will be lost;
monitor the winding of the fishing line onto the reel drum; sometimes the bait can make a rope out of the fishing line;

The most successful is considered to be leading the bait along the bottom, or rather, touching the bottom. For proper guidance, you must first place the bait on the bottom, and then lift it and hold it at the desired depth. Therefore, the fisherman needs to learn to determine the very moment of fixing the bait to the bottom. The moment the bait touches the bottom, the line will weaken. Now you should quickly jerk the rod, raising the bait.

At the same time, reel in the reel to eliminate any slack in the line. The bait must be held near the bottom, not along the bottom. Otherwise, hooks will follow, and bites will be rare.

The speed at which the bait is carried also matters. At different depths you can vary the speed, slowing down or increasing it. Experienced spinning players use stepwise guidance, which consists of stopping the rotation of the reel at regular intervals.

Flaws

Among the negative points are the following:

The cost of a quality device is quite high.
A multiplier is a complex device. And some reels are equipped with additional mechanisms: a mini-computer, line sensor, etc. Therefore, it is necessary to spend some time to fully understand the functioning of the device.
After casting, a spinning rod with a multiplier reel must be transferred from the right hand to the left each time due to the fact that the rod itself is heavy, since the reel is located on top.

How to choose a casting spinning rod for jigging

Usually a beginner is faced with the question of how to choose a casting spinning rod for jigging. Here you need to look at the main indicators:

The length of castings is determined by fishing locations. If you have to fish from the shore, then the minimum value is 2.5 meters. This is understandable, because from the shore you need a long cast. If fishing is done from a boat, then a whip up to 2.5 m is suitable. You must immediately understand that as the length of the form increases, the sensitivity of the tackle decreases. It is also inconvenient to fish and get fish into the boat with a long whip;
sensitivity is a subjective concept. Each angler has his own hand, and it feels the bite in his own way. A sensitive spinning rod is one in which the angler, without looking at the tip, clearly hears the bait;
the structure of castings is determined by their deformation stability. To determine the formation, you need to take the whip in your hand and move it with your hand. If the blank bends, the action is soft; if one tip oscillates, then the action is hard. There are medium, fast and super-fast tunings;
The rigidity of the blank is directly dependent on the action. When choosing, you need to proceed from the place where you fish. If this is a lake with almost stagnant water, then softer blanks are suitable; they track the bottom better. But when fishing on a river, then a hard one will do; it will be able to work with the current, since the soft action cannot cope with the flow of water;
The power of a spinning rod is expressed in grams of bait that can be cast with a given whip. They are divided into light - the weight of the bait used is up to 15 g, medium - up to 30 g and hard - up to 60 g. Although this classification is conditional, an experienced spinning angler will be able to pull out a pike weighing several kilograms with a light whip;
price is a relative indicator of casting characteristics. It must be said that with a cheap casting spinning rod, the angler will not learn all the delights of jig fishing. They can only fish at shallow depths and at close range. It's another matter to use heavy jig spinning rods, the pleasure is much greater.

Pros and cons of a spinning reel

Advantages:

also suitable for throwing light baits;
Delicate fishing with an open bow is possible;
ease of maintenance;
a “beard” rarely forms;
a large assortment

Flaws:

problems arising under extreme loads;
not too durable;
does not perform ultra-long casts;
on popular models, the laying of braided fishing line is often not careful enough.

Penn brand products

This company has been one of the best manufacturers of its kind for many years. Thanks to their excellent design with a gold-plated body (sea fishing reels) and excellent technical data, Penn baitcasting reels have a special status among their competitors. It should be noted that the price of such products is quite high. Therefore, they are not available to all avid fishermen.

This company's assortment also includes cheaper items. It is noteworthy that they also have high quality indicators. As a rule, such products can last for a long period of time.

Multiplier reels for spinning: instructions and features of proper storage

In order for the reel to serve you as long as possible, you should follow certain rules. They are as follows:

The first thing to mention when it comes to caring for your own baitcasting reel is lubrication. It is recommended to use liquid lubricants for high-speed bearings, which are available in the form of sprays. For other coils, thick products are used. You should not skimp on product care. It is recommended to use lubricants from well-known specialized companies, because the quality of care in the future will affect the durability and serviceability of the multiplier reel for spinning rods. Each successive lubrication must be carried out after the layer previously applied to the rubbing elements of the reel has darkened. As a rule, this procedure must be done every second or third fishing trip. It is not recommended to use lubricants from different companies for the same baitcasting reel.
If sand particles get into the reel mechanism, it must be washed with warm water. After this, you should lubricate everything again.
There are special waterproof cases for storing reels. And to protect the product from unexpected impacts, you can use a metal tube.

Rating of multiplier reels

Budget Chinese multipliers will not perform as well as proven brands. A reel made of inexpensive plastic will most likely quickly become unusable. When purchasing, we recommend considering models from vendors from the USA, Japan, and some European countries (for example, the Swedish manufacturer AbuGarcia). These companies present a large range of models, tested by thousands of anglers.

The top best manufacturers of baitcasting reels look like this: