10 best reels: rating of good fishing reels [TOP 10]

When choosing a reel for carp fishing, you need to focus on models for long casting. When fishing for carp, it most often happens that a promising fishing spot is located at a distance of over 80 meters from the shore.

To cast a heavy sinker or feeder over such a distance, you will need a strong, long rod in combination with a large reel, which must have a special spool shape, high-quality winding and sufficient line capacity.

Let's start with the fact that the longest cast depends heavily on the ease of the line coming off the spool.

The casting distance of the reel is affected by the following parameters:

Spool size.
Spool shape (cone).
Winding quality.
Spool profile (depth).
Smoothness of the spool edge.

The wider the spool, the more line flies off when casting. Therefore, all carp reels for long-distance casting are equipped with large and wide conical spools, the so-called “Long Cast”.

The spool profile, that is, its depth, also influences the range. Shallower spools are called low profile spools, and the reason for this shape is that when casting, the line rubs against the side of the reel at a lower angle, which creates less friction (more line slip).

The spool material (coating) also affects friction; the smoother it is, the better. There are spools made of pure aluminum, and there are models with a special anodized coating, titanium and other materials.

Carp reel pull

The torque of a carp reel depends on its gear ratio, which is indicated on the spool and shows the number of rotor revolutions per revolution of the handle, for example, a value of 5:1. The higher this value, the faster the reel winds the line, but the weaker its pull. Reels with a 4:1 gear ratio are much more powerful than those with a 5.5:1 ratio.

A gear ratio that is too high means that when working with heavy weights and large fish, the reel is subject to more wear and tear, which in theory reduces its service life. And a smaller gear has a certain power reserve, making it more durable.

To extend the life of the carp reel, try not to put a large load on it, but work by deflating the rod.

Long casting technique

Successful mastery of feeder casting means 100% accuracy of each throw. To properly cast a feeder, you need to adhere to certain rules:

Replace the spool with a weight equal to its weight. Getting a new sinker is much easier and cheaper than getting a reel, which can easily be lost during training. And additional weight is a must.
Carefully study the design of the tackle, make sure it is assembled correctly, because... The speed of line ejection depends on how evenly you set the rings.
For convenience, the distance between the load and the signal tip should be at least 1 meter.
Starting position: the working hand is leaning against the reel leg, the index finger presses the fishing line to the rod, and with the other hand we hold the tip of the handle.
When throwing, you must carefully monitor the fishing line or cord to avoid tangling.
We throw the tackle step by step:

- move the rod back until the reel reaches a vertical position;

— smoothly throw the tackle, straightening the working hand, so that the second one moves towards the chest;

- release the line at the moment when the fishing rod is perpendicular to the plane of the reservoir.

As soon as the load touches the water, do not try to hold the handle itself vertically; it should be tilted 70-80 degrees relative to the horizon, so there is less chance of the line breaking.
Adequately assess weather conditions, they also affect range and accuracy.
Always check that the line or cord is not tangled.

Proper technique is a process that requires a long learning curve. Don't despair if it doesn't work out for you the first time. The more you practice, the better you will do in the future.

The importance of baitrunner in carp fishing

Any carp reel must be equipped with a baitrunner, which is an additional spool friction that is turned off by pressing a button (bracket). The baitrunner performs two important tasks: it releases the fishing line and signals with a ratchet.

Without a baitrunner, a carp can take away your expensive fishing rod, along with the reel, fishing line and equipment in a few seconds. Moreover, there are cases when, when biting, the rod-pod with all the rods turns over, stands are torn off, etc. In general, you shouldn’t underestimate the power of large carp; they will drag your gear into the depths, and you won’t have time to get there, so a baitrunner is very important.

Useful information for beginners

Most often, gears in inertialess reels break, which happens when they are used irrationally. For example, with high-speed reels, you should never fish out large fish by simply rotating the handle. Experienced fishermen use the “pumping” method. They pull the fish towards them with the rod, moving it to a vertical position. And then, quickly rotating the reel handle, lower the rod down. You just need to make sure that the rod and line do not straighten out in a straight line. With this method of fishing, the entire load falls on the rod and the friction mechanism of the reel. And the mechanism that rotates the line layer avoids too sharp, powerful and, as a rule, unexpected influences from large fish.

It is also the fault of the fisherman that the friction brake of the spinning reel deteriorates. You should know that outside of operation, during storage, this brake must be completely relaxed - unscrewed all the way.

A spinning reel must, with its volume (line capacity), power and other parameters, correspond to the rod, fishing line and fishing characteristics. You should know that the same reel is suitable for one type of fishing and unsuitable for another. So, for example, in a current, a rotating spoon produces very high drag and the reel is forced to overcome it. Jig baits, even the most bulky ones, create several times less resistance. That is why not very powerful reels are acceptable in jig spinning, although, of course, a reel with good traction is preferable. Especially when fishing with strong braided line.

How to choose the right spinning reel

The importance of ease of movement and sensitivity of the reel is very high when the bait is evenly retrieved. You reel in a fishing line with a spinner at the end, and the slightest change in its play as a hint of a bite is transmitted not only to the rod, but also to the reel. The sensitivity requirements for jig fishing, in my opinion, are less stringent. Since the vast majority of bites occur when the reeling is stopped. And in this case, the fisherman perceives them either by sight or by the hand that holds the rod.

The effectiveness of fishing, not to mention its comfort, largely depends on the correct choice of a high-quality and reliable spinning reel. Reliability is especially important when fishing for large pike. The caught fish desperately resists, can break the reel and escape, breaking the fishing line on the hapless fisherman’s tackle.

About bait boats

To accurately and quickly feed the fishing point, you can use a radio-controlled carp boat. The advantage of such a device is that it can be loaded with several kilograms of bait, and also have an echo sounder (sensor) on board, which is very convenient for scanning the bottom and fish.

Although such a toy is quite expensive, and not every angler can afford it, it brings a lot of benefits and pleasure. If you want to get acquainted with the models of carp boats, we recommend visiting the Carpboat online store. They have an assortment of eight models of carp boats, echo sounders and other useful things for fishing.

If you are interested in the topic of choosing spinning reels, we recommend that you read our new review.

Author of the article: Vitaly Leonidovich Ivanov, 2021.

How to equip a fishing rod with a reel

When buying a new reel or when replacing fishing line, the angler is faced with the problem of equipping a fishing rod with a reel. In order to avoid mistakes, use our instructions.

The reel must be secured to the fishing rod in the following sequence: unscrew the fastening nut a certain distance, move the moveable stop, insert the reel between the stops and tighten the nut back tightly.
Do not wind the line onto the reel in advance. Otherwise, you will definitely not avoid twisting and the formation of so-called beards. Wind the line onto the already installed reel.
Take a spool of fishing line and pull the free end into the smallest top ring, then into the next one, and so on until this end goes to the end of the reel spool. Perform the actions in exactly this sequence - this will ensure correct winding. Returning to the reel, make a special loop at the end of the fishing line, which you put on the spool. When the line is pulled, this loop will tighten.
To avoid line twisting, provide sufficient resistance. To do this, put the reel with fishing line on a pencil or put it in your pocket. Of course, you can also use modern means for winding fishing line onto a reel. They will provide enough resistance, but do not overdo it - too much tension can create loops.
Open the line guide cover. Make a tightening loop at the free end of the fishing line and attach it to the spool so that it tightens when pulled. Now start winding the line with slow turns of the spool. The line should be under slight tension.

And here is a detailed guide to making equipment and float fishing techniques.

Choosing the right spinning reel

It is impossible to imagine most types of fishing without a spinning reel. She takes a direct part in casting the tackle and helps well when pulling in fish, especially trophy specimens. Their designs are complex, but easy to manage. It is also necessary to understand that there are trolling models for float gear, and there are significant differences between them.

Characteristics, how to choose a spinning reel for a feeder

When using feeder fishing, it is used quite intensively, especially if you take into account the weight of the cast feeder. Braided line is often used, which reduces windage and is more susceptible to bites. All this puts a lot of stress on the spool.

Therefore, it is necessary to choose the best spinning reels for feeder that can last for several seasons. Approximate characteristics will be as follows: standard size from 3000 to 4000, gear ratio 4.5:1-5.2:1. The spool should be metal, the reverse stop should work instantly.

Which spinning reel to choose for trolling - durable

In this type of fishing, the primary criterion is strength and the ability to withstand powerful loads. This is explained by the fact that fishing is carried out for large specimens of fish. It is better to choose those models that have a recoilless brake system that is activated when cutting.

The best spinning reel for trolling should have a high-quality line roller. It will be a big plus if it is mounted on a bearing, which will somewhat reduce the twisting of the line when removing it from the water. The reel should be powered; in trolling there is no need to quickly move the bait.

Parameters on how to choose a spinning reel for a float fishing rod

The use of inertia-free fishing in float fishing provides undeniable advantages when compared with blind equipment. In this case, it is possible to fish over considerable distances and at considerable depths. The best Chinese spinning reels show good results.

When making a choice, you should pay attention to the bobbin, which should be smooth, without various roughnesses and serrations. Knowing the diameter of the monofilament used, you can select a spool with the required line capacity. Fill it so that no more than two millimeters remain to the edge of the sides to ensure free flow of the scaffolding.

Let's consider which spinning reel is better for jigging

A jig meat grinder does not have to be expensive and sophisticated. It must have the minimum required characteristics suitable for fishing conditions. When thinking about which spinning reel to choose for a spinning rod, it is important to know that both power and high-speed models can be used in jigs.

The best budget spinning reels may come with an additional spool of a different depth. If the first has too much capacity, then in order to avoid backing, you can use a spool with a small depth for small-section fishing lines.

So, we believe, we were able to quite comprehensively and completely answer the question of which spinning reel is better for spinning. Even among budget models, it is possible to choose very successful options that will faithfully last for more than one season.

Top spinning reels for various types of fishing

For each type of fishing, you can create your own rating of spinning reels. As always, brands such as Shimano, Mikado, Daiwa, Salmo, Banax are at their best. The rods produced by these companies have excellent characteristics.

The best spinning reels for spinning rods rating of brands

Daiwa Sweepfire X

. Budget spinning reels are topped by this model. Very durable and of good workmanship. Designed for fishing on monofilament thread with uniform fishing. True, there is a minus - the quality of the line winding suffers, and besides, it contains one bearing.

Daiwa Megaforce A

. At first glance, the heavy reel has excellent ergonomics and remarkable qualities. The mechanism is equipped with five bearings and has a reverse stop. Suitable for fishing with monofilament and braided line.

Shimano Nasci13 HG

. Included in the rating of manufacturers of spinning reels. Due to the flat body it is easy to distinguish among competitors. Supplied with an aluminum spool. The scaffolding roller is made with a bend, due to which scaffolding overlaps behind it are minimal.

Okuma Artics RTX

. With eight bearings it has a low mass. The rotor is made of graphite, all other components are made of aluminum alloys, which together gives a soft ride and long-term operation. It is included in the rating due to a special mechanism that protects the clutch from moisture and abrasives.

Daiwa 10 Revros MX

. The review of spinning reels is completed by a very light model with a planetary laying system. Equipped with four bearings. Different modifications differ in gear ratio. But, according to fishermen, there is a slight backlash that cannot be eliminated.

Rating of spinning reels for jigs: the best of the best

Jig fishing involves the use of not only inertialess meat grinders, but also multipliers. It is believed that if the mass of the bait does not exceed fifteen grams, then it is more comfortable to fish with a spinning rod, although there are models that work well with large weights.

DaiwaCertate Hyper Custom 3000

. The best spinning reel with an appropriate price. The mechanism is securely protected from moisture and sand and has twelve bearings. Very light spool with titanium sides. With a small weight it has sufficient power.

Ryobi Excia MX 3000

. The model is more intended for professional fishing. With nine bearings it has a gear ratio of 4.9:1. The clutch is located at the front of the body; depending on the cross-section of the line, the spool capacity reaches up to 300 m. A spare spool is not provided. It is one of the top spinning reels for budget class spinning rods.

Shimano Twin Power 4000 PG

. It is considered a powerless inertia-free vehicle, the gear ratio is 4.2:1. It has very powerful characteristics, thanks to which it can withstand heavy loads. Most suitable for heavy jigs.

DaiwaTD-SOL

. It cannot be said that it is included in the rating of inexpensive spinning reels, but the price is quite acceptable for its class. Aluminum body and reverse taper spool. Front clutch with decent sensitivity. Gear ratio – 4.7:1, seven bearings. The kit includes an additional spool.

Shimano Biomaster FB

. The inertia-free plant easily tolerates sea water. Quite a powerful meat grinder with smooth running. Seven bearings, gear ratio – 5.2:1. The scaffolding is wound on the drum in a cross way.

Spinning reel for twitching rating of the best

The top 10 best spinning reels have been compiled above. Let's try to add a couple more meat grinders, whose purpose is twitching. With this method of fishing, the bait either keeps the line in tension or loosens it, which as a result leads to the formation of beards and the dropping of loops. This is why twitching requires a meat grinder with good scaffolding.

SHIMANO TWIN POWER 15 2500S

. Heads the review of spinning reels. This device is a premium one. It has incorporated the maximum of advanced and innovative developments. Features include rugged design, water resistance and amazing power.

Ten bearings make the operation of all mechanisms smooth and soft. The friction brake is located at the front, and the small weight of 240 g does not disturb the balance of the gear. The gear ratio of 5.2:1 classifies the device as universal. Twelve types of coatings are applied to the elements for protection.

STINGER PRIORITY 2500

. Can be added to the top budget spinning reels due to the low cost, which does not in any way affect the excellent data. It is considered the most acceptable version for beginner fishermen, and also has good line laying.

A spare drum with a shallower depth is included. The weight is small - 245 grams, the gear ratio is 5.2:1. The reel has a fairly gentle stroke thanks to ball and roller bearings.

If we consider the rating of spinning reels for feeders, the leaders here are those manufacturers who primarily consider the reliability of these devices, capable of working with large weights. The fact is that the feeder uses feeders that need to be thrown over long distances.