Choosing a place and time for trout fishing on a feeder
Content
The most productive fishing for trout is considered to be with a spinning rod in the spring when the thaw begins. This is the period when the fish tries to get enough after the cold weather and reacts well to the bait offered.
You should go fishing on lakes and rivers where the water temperature is quite low. Fish can also be caught in fast-flowing streams located near the mountains. Favorite places for production are reservoirs with anomalous bottoms. Each region is distinguished by special conditions and places where fish are concentrated, which differ significantly from each other. In this regard, equipment should be selected based on the terrain, temperature conditions and fishing season.
The predator concentrates in snags and holes; it should be looked for under large stones and waterfalls. During the summer heat, the fish prefers to “rest” at the roots of trees growing out of the water, and in the washouts near the shores located in the shade.
In the spring, when the thaw sets in, trout fishing with a spinning rod is considered the most productive
Where is the best place to use a trout feeder?
There are two types of trout in local waters: lake and brook, each with its own personality and location. For example, the first type of trout can be found exclusively in those lakes and reservoirs where the water has a low temperature and a mirror-clean surface.
Important! It is better to catch trout on a feeder in the spring, after the first break-up of ice. Since during this period of time the fish gradually begins to become more active after winter, and its catch can give good results. In early spring, the catch of predators is more modest, since bait gives practically no results.
But as for brook trout, it is better to start searching for it in streams or rivers with fast currents, where the water also has a low temperature. At the same time, the bottom of such a reservoir should not be flat, but wavy, with a large number of depressions, snags and stones. After all, such places are considered favorite places for trout.
Selection and installation of equipment for feeder fishing
Fishing with a feeder differs from spinning. In the first case, the device has a larger number of throughput rings and several replaceable tips. The choice of design elements depends on a number of factors, for example, the weight of the feeder that is used. The end point of the feeder installation is a kind of sensor that signals a bite. In order to improve the visibility of the element, the product is painted in bright colors.
Anglers can choose from ultralight, light and medium trout tackle, as well as heavy and extra heavy. To understand which one should be used, it is necessary to take into account the strength of the water flow, the weight of the feeder and the casting distance. Beginners are recommended to use middle-class designs. They easily adapt to various fishing places and are popularly called universal.
Read more
How to catch bream on a feeder
You should pay attention to the rod body and its length, reel and line. Ideally, for long-distance fishing, a design up to four meters with a spinning reel and standard fishing line (diameter can vary from 0.15 to 0.2 mm) is suitable. If the goal is to cast the bait as far as possible, then it is better to use a braided line. The main feature of the material is the lack of stretchability. In any case, a favorable fishing outcome depends on the quality of the fishing line. A strong, inconspicuous, thin line is considered the most suitable.
The main elements of equipment for trout fishing on a feeder are:
- leash equipped with a hook;
- feeder
The choice of design elements depends on a number of factors.
The leash should be positioned so that when the fish grabs the bait, the slightest changes in the form of vibrations and movement are quickly transmitted to the rod. The best options are hooks No. 6, No. 7 and No. 8.
Feeder structures come in the form of symmetrical, asymmetrical loops and Grandner loops. Only after trying each of them can you choose the most suitable and convenient to use. Therefore, you should focus on the preferences of the fisherman.
Bait supply
Unlike conventional feeder fishing, when fishing for trout you need to try to make sure that the hook with the bait does not sink or lands very slowly on the bottom. To achieve this effect, you can add some kind of buoyant material to the nozzle, for example, a piece of foam. The leash itself is best made from nylon coated with fluorocab. Such a fishing line will become as invisible as possible to the fish, while having sufficient elasticity.
Recommended reading: Crucian fish
It is better to use light-weight trout hooks with a long shank. Size according to Owner classification 10 or 12. The elongated shape of the hook is needed for better detection of fish that bite at mid-water. In addition, the design of such a hook allows you to easily place an element of floating material.
The best live bait for trout fishing is a bunch of bloodworms or maggots. On some days, a sandwich made from these larvae works better, especially when bloodworms predominate.
Fish can bite in different layers of water, so it’s better to start with a short leash, 30 cm long. If the fish likes the bait, the bites will most likely begin at the bottom. It often happens that trout are interested in bait, but swim higher, picking up sinking particles. In such cases, you will have to experiment with the leash, gradually increasing its length. When experimenting with the length of the leash, it makes sense to recast after 5-10 minutes. You need to increase the length of the leash gradually, 10-20 centimeters at a time, changing the color of the foam ball.
The trout bite greatly depends on both the size and color of the bait. The best colors for light hook bait are yellow, red and green. It is advisable to have maggots of different colors with you.
At the beginning of feeder fishing, it is important that the trout make their presence known. When you manage to see the first bite, it becomes much easier, you can call it half the victory.
Although trout is a predatory salmon fish, fishing for it with a feeder often outperforms spinning rods in terms of effectiveness. Most likely, the point here is that the fish really responds well to bait.
Choosing bait for trout fishing
Trout is considered an unusual fish, with character and peculiar behavior. Therefore, in order to attract the attention of valuable prey, it is necessary to prepare tasty and high-quality bait. This can be done in two ways: purchase a ready-made product in a store or make the treat yourself at home.
Salted herring, eggs, salmon caviar and shrimp are some of the most favorite fish products. These ingredients must be present in the bait.
A prerequisite for high-quality complementary feeding is that it should not quickly dissolve in water. When the product gets into the water, it should form a cloudy cloud of dust, which will release the trout’s favorite aroma, and then the fish will instantly switch its attention to the area where the bait is being cast. Color plays an important role. It is recommended to make a lot of bright colors. Upon arrival at the fishing site, the finished product should be thrown into the water and the bait should be periodically thrown in. When preparing a treat at home, it is important not to overdo it with flavorings, otherwise it may scare off the prey.
It is necessary to prepare tasty and high-quality bait to attract the attention of prey
Lure
Lure for trout on the feeder can be purchased at special fishing stores, or you can make it yourself. When preparing trout bait yourself, you often use salmon caviar, eggs, shrimp, squid, and even salted herring with caviar. One of the main conditions in the case of self-production is that the trout bait must have good buoyancy. Also, bait for trout should not dissolve in water for a long time and create a so-called dust or cloud that attracts trout with its color and smell. If you don’t have time to make your own bait, you can buy special trout bait for catching trout. In this case, you need to make sure that the smell of the complementary food is not too noticeable, as this may scare away the fish. But you can experiment with color; trout are attracted to bright colors.
Lures for trout fishing on a feeder
After preparing the bait, you should stock up on high-quality bait. Not everyone knows what to use to catch trout so that the result exceeds all expectations. Since the prey is a predatory fish, it is recommended to give preference to baits of animal origin. The advantage will be the bright color of the bait, its active movement and emanating aroma.
Read more
Technique for catching chub using feeder tackle
Trout's favorite foods include:
- muckworm;
- the insides of a representative of this type of fish;
- fry;
- pieces of meat or fish;
- insects and their larvae (caterpillars, midges, grasshoppers, etc.).
The fisherman's task when using bait is to attract fish, and not to feed it, otherwise any bait will not bring results.
Features of trout fishing on a feeder
For feeder fishing to be successful, it is necessary to properly equip the structure. Experienced fishermen have their own secrets, but beginners can only wish good luck. This fishing technique requires experimentation, imagination and patience.
Due to the fact that trout are at an average level relative to the entire water depth, the feeder should be placed approximately in this range. During the current, the bait will wash out on its own, creating turbidity around, which is undoubtedly a big plus. In still waters, it is recommended to periodically move the device, creating a whirlpool of water.
The natural habitat of fish is unpredictable. Therefore, a fisherman’s arsenal should have different types of groundbaits, lures and lures. The rigging method depends on the personal preferences of the feeder owner.
Originally posted 2018-08-22 16:37:15.
How to fish on paid sites
Not all fishermen enjoy fishing for trout in the wild. The unpredictability of the catch and the naturalness of the environment do not attract all fishing enthusiasts. In this case, fishing for trout on a feeder on a platform can be a real pleasure for many anglers. There are many advantages to traveling to a paid reservoir where fish are kept and grown. In such reservoirs all conditions have been developed for comfortable keeping and breeding of this type of fish. In ponds and reservoirs, the bottom is specially leveled, the depth level and water temperature are controlled. In such reservoirs, the chance of catching trout increases several times. Another important advantage is that in almost every paid reservoir there are houses for living, bathhouses and parking lots. Therefore, after fishing you can relax in good conditions. The place for fisherman in the pay zones is equipped with special spacious bridges, from where it is convenient to fish. In addition to all of the above, the material side is also a plus. As a result, you can spend much less money on paid fishing in your city than in the case of a fishing trip in natural conditions. Fishing for trout on a feeder can bring a lot of pleasure when the equipment is selected correctly. Every experienced fisherman has his own fishing secret. For some it involves preparing bait, for others it involves fishing techniques. And for beginners, in order to catch trout with their own hands, you can start with paid reservoirs, where there are all the conditions for fishing. Get your first experience, study the behavior of fish, and enjoy your first trophies. And only then, to get more acute, primitive sensations, you can go fishing in the natural environment.
