How to catch silver carp using silver carp killer tackle

The silver carp killer refers to specialized and narrowly targeted gear designed for catching fish that feed on plankton in the water column. One of the brightest representatives of this way of life and nutrition in our freshwater bodies is the silver carp. Among the majority of fishermen, there is an unshakable opinion that it is almost impossible to catch this fish, and it can only become a rare trophy and mostly as a result of accidental bycatch. The silver carp killer tackle completely refutes this opinion and gives a real chance of catching a giant.

Fishing for silver carp with silver carp killer gear is distinguished not only by its enviable results, but also by the interesting nuances of preparing the equipment itself and planning a fishing strategy. To conduct fishing competently, a fisherman must understand the peculiarities of fish behavior and understand the principle diagram of the operation of the fishing device. Catching a killer silver carp will not require the angler to spend a lot of money on assembling the structure itself, but you must initially be prepared for the fact that the fishing session itself will drag on for long hours waiting for a rare bite. But we can say with confidence that even a single bite can bring a fairly large trophy into the standings, which even avid carp anglers will be jealous of. The angler will learn about the real possibilities of achieving such a result by reading the article presented below about catching silver carp with silver carp killer gear.

What is the silver carp killer tackle?

At first glance, specific equipment with a creepy name can cause the fisherman a certain perplexity both in the assembly of the structure and in the very principle of subsequent fishing. But having become more thoroughly familiar with the subject of fishing techniques, the angler will understand its absolutely elementary essence and ease of use. The silver carp killer is assembled from standard, inexpensive equipment that is widely used in feeder and float fishing. The rig is delivered to promising fishing spots using a feeder or spinning rod equipped with an inertia-free reel with a baitrunner and spools with a braided cord.

The killer of silver carp will require the use of high-test rods, from 100 grams and above, as well as reels with powerful traction characteristics, which are used in carp fishing. After all, the installation itself has a mass of about 100–150 grams, and the weight of the caught fish can reach tens of kilograms. Since the fishing principle is based on the ambush and wait-and-see method, the fishing rod is equipped with a stand, and even despite the presence of a float in the equipment, an audible bite alarm. Braided cords with diameters of 0.2 mm and above are suitable for hunting. The optimal amount on the spool is considered to be a length of 100 meters, which is usual for most feeder fishing methods. The most dexterous device is mounted to the end of the cord.

The silver carp killer includes a system of sinkers, a signaling float and trempel, a special bracket on which the feeder and hooks are attached. The feeders are loaded with dusty bait, which creates a muddy place in the immediate vicinity of the equipment supply, which attracts a flock of silver carp. A school of fish, approaching the bait, begins to actively filter the suspension coming out of the feeder into the water. The hooks located in the feeder area, in the process of active filtration of nutrient turbidity, fall into the fish’s gills, after which it becomes the trophy that any fisherman dreams of.

Equipment for catching silver carp

To create equipment for catching silver carp you need:

Thread the sinker through the main line.
We pass two stoppers and a float through the main line.
We tie a “trempel” to a feeder from which three leashes hang.

The result is equipment for catching silver carp from the surface.

Let us point out that there is also another option for equipment, which excludes the use of a “trempel”. In this case, place a sinker on a leash at the bottom of the feeder, and two leashes on top. This equipment is best used when fishing on a reservoir with a clean bottom.

It is best to secure these tackles on a cambric. To make it convenient to remove it if necessary. This may be necessary if you need to replace the tackle with a bottom one.

Fishing process

After the tackle has been thrown, you need to make a couple of pull-ups. Do not forget that the sinker must completely roll along the line and fall to the bottom of the reservoir. After this you need to wait for bites. Usually the silver carp comes up to filter the resulting cloud and swallows the hook.

So, when the float sinks sharply, this is a sure sign of a bite. After you have made the hook, start dragging it to the shore. Just don't do it too quickly. Better wear him out.

Nuances of fishing

If you see that the float is tilted at an angle of 45 degrees, then this is a sure sign that the feeder is empty.
If purchased technoplankton does not dissolve well in water, pre-soak one barrel. And when you rethrow the tackle, install it.
If there is no bite within an hour, then it is best to re-throw the tackle. Try to throw in one place to collect more fish.

Reasons why fishermen choose this tackle

The narrow specialization of the gear does not detract from the advantages of the method, which is considered a highly effective method of fishing. But fishermen choose this gear not only for the opportunity to be guaranteed a trophy when biting. The silver carp killer also has a number of other important criteria that bring the method recognition and respect from the fisherman. Fishing enthusiasts are attracted by the low cost of equipment, which is fraught with the possibility of subsequently catching huge fish. The simplicity of a highly effective design that can be assembled from scrap materials even by a novice angler.

The equipment is used for mining at different depths, and its shape allows you to make very long casts and fish promising areas of the reservoir far from the shore. This factor brings not only the desired silver carp into the catches, but can also cause grass carp, and often carp, to bite. Many fishermen also like the fact that fishing does not necessarily require bait, because for success, only the components of well-prepared bait or special technoplankton, which attracts fish with a strong release of aromatic turbidity, is enough.

Advantages of gear

The silver carp killer is a highly targeted, highly effective tackle. Its specificity lies in its “tailoring” for this underwater inhabitant. Sometimes it is used when fishing for grass carp, and very rarely when hunting for carp.

The advantages of this gear are:

accessibility and prevalence;
ease of installation and self-production;
wide variability for different fishing conditions;
relatively low cost and the ability to use available materials;
high efficiency;
the ability to fish any horizons from the very surface to the bottom.

The silver carp killer can be used both with technoplankton and purchased bait mixtures, as well as with home-made porridges.

DIY silver carp killer

Initially, a sliding sinker is strung on the main cord. This sinker is used as an anchor, holding the equipment at the point required for fishing.

Important! The weight of the sinker for anchoring is selected based on the weight of all equipment and taking into account the current forces in the fishing area.

The next element of the equipment is a massive float. The best option would be a barrel-shaped signaling device made of foam with a short keel and antenna. The float is attached to the fishing line using a sliding fastening type, through a ring. Zoned, the float is painted bright red on top and a discreet green tone on the bottom. A trempel is attached below the float. This part of the equipment can be made from rigid steel wire. Trempel is a wire bent around the perimeter into a rhombus or square, with fastening ears at the outer corners. The upper eyelet is used to connect to the main fishing line. The bottom ring is for mounting a feeder or capsule with technoplankton, and the side rings are for installing leashes with hooks.

Important! Leashes with hooks should be slightly longer than the length that reaches the bottom of the feeder; as a rule, this value is in the range of 10–20 cm.

To balance the float and equipment, it is possible to use loading in the form of a series of pellets, which are placed on the fishing line under the float. When using feeders, preference is given to accessory forms in the form of a spring, into which leashes with a hook are introduced. Leashes are used with transparent monofilament, 0.25-0.30 mm thick.

Bait for silver carp

Silver carp are caught using technoplankton and plant baits.

Technoplankton is a compressed barrel of bait. It can be used to catch a variety of fish. It is secured using the “silver carp shelf” tackle.

If you want to learn how to make technoplankton with your own hands, you can learn about it from our article. You can also use some plant baits to catch silver carp. When approaching, the silver carp will suck them in and bite accordingly.

Let's highlight some of them:

Polka dots.
Pieces of cabbage or cucumber.
Vegetables.
Fruits, etc.

The main requirement for bait is its freshness. The bait should be firmly attached: for the most part, you have to wait a long time for a bite and a poorly secured bait will fall off the hook.

Silver carp baits can be prepared without much difficulty at home. As for plant food, everything is simple: it will be enough to break the bait into small pieces. It’s better to bait them in several parts per hook.

To make technoplankton at home you will need:

Pea powder.
Carp bait.
Powdered technoplankton.
Baby food.
Groundbait "green silver carp".

You need to mix all the ingredients so that they are used in equal parts. To press the mixture, use a mold that you will clamp in a cleaver to compact the mixture.

The catch largely depends on the quality of the hooks

Particular attention is paid to the selection of hooks, which should be durable and resistant to bending while being relatively small in size.

Important! To equip, use hooks number 10–12, which are made of durable and thick steel. Choose models with a shortened forearm.

The bait is rarely used in this fishing method, and if it is used, it is of plant or artificial origin, the role of which is often foam balls . Therefore, a hook with a short shank will provide fishing conditions in both cases, while remaining unnoticeable to the fish. Since the feeder should always be located above the hooks, special attention should be paid to controlling the length of the leashes, otherwise even an effectively lured trophy will not become a catch.

Fishing technique and tactics

If you have a well-assembled tackle, it is not at all difficult to catch quite a hefty silver carp by casting it in the expected biting area. The main thing is to make timely hooks, because the fish is strong and restive.

Tactics:

First, you need to throw 1-2 portions of complementary food into the water, wait for the turbidity and many particles to float to the surface inside the cloud.
Thread pieces of foam onto the hook to make it easier for the fish to swallow it along with food.
Fill the feeders with bait.
Place in water.
Wait for bites, preferably keeping a landing net at hand.

If you scare the fish away, it is unlikely that it will return at the same time and all efforts and expectations of bites may become in vain. You need to maintain silence on the reservoir, and it is better to first find paths trodden by fish near reeds, dense vegetation, and holes.

In the selected area, immerse the reed branches in water and wait to see if the silver carp gnaws on the proposed vegetation.

If everything was successful, then you can immerse the equipment in the middle layers of water, hanging a reed leaf on a hook. If the bush turns out to be eaten away, it means that there are fish in this place. All that remains is to wait for the bites and arm yourself with a hook so as not to miss the trophy. Strength and skill when fishing, of course, will also come in handy.

How to properly catch silver carp killer tackle

The best time to catch silver carp is from early morning until lunchtime. Sometimes he can feed intensively for a couple of hours in the evening. Having chosen a promising fishing point and prepared a place on the shore to install the gear, they load the feeder with bait or use technoplankton as bait.

Important! It is best to deliver heavy rigs by transporting the bait to the rig installation point on the boat.

Non-massive rigs are cast with a rod. Having made the cast, the cord is tightened using a reel, and the tackle is placed on the signaling device and awaits the approach of the trophy. In the absence of fish activity, the feeder is recharged with complementary foods every 2–3 hours. A float placed on its side, signaling the emptyness of the feeder, will allow you to visually determine the lack of complementary foods. On subsequent casts, the fishing horizons are changed. As a rule, the first casts are made into the water column about one meter from the surface, each time increasing the depth for the next cast by exactly a meter. As a result of a distinct bite, during which the fishing line is pulled together, the so-called steam locomotive in the fishing community, the fisherman immediately begins to fish. Hooking is not required when fishing for silver carp; in almost all cases, the fish are caught on their own.

Fishing requires a lot of effort and constant control of the tension of the cord, which should release only as a result of the operation of the clutch. It is recommended to use a hook instead of a landing net. After all, a silver carp catch of 30–40 kilograms is not uncommon, and given the size of such a fish, a landing net will not always be at hand.

Habitats

Silver carp are found everywhere in ponds, rivers, and reservoirs where there is a lot of aquatic vegetation. They prefer reservoirs with a muddy or rocky bottom, seaweed, also in water depths of up to 3-5 meters. In summer, at dawn or in the evening, you can find them right off the coast.

We suggest you read: Fishing for saberfish in the fall

Favorite places:

shallows with slow currents;
artificial reservoirs rich in plankton;
sandy, clayey or rocky bottom.

You can calculate the habitat using a simple method - stick several branches of reeds in the intended fishing area. If after 2-3 days they turn out to be chewed and broken off, then most likely there are schools of fish nearby. Silver carp bite well in warm windy weather or when it is drizzling.

Main characteristics:

inertia-free coil;
a fishing line with a blue float at the top and a brighter one at the top at the bottom to attract fish;
sliding float for fixing the weight;
a fishing rod up to 5 m in length in the form of a feeder tube with a foam ball attached;
a powerful fishing line equipped with a weight with the ability to move back and forth depending on the depth of the reservoir;
bead as a stopper for the float when immersed in water
bite alarms for greater comfort when fishing.

The main attention should be paid to the feeder with plankton. You need to hammer it in such a way that the food is washed out evenly and gradually when lowered into the water surface.

The components of the “silver carp killer” tackle include:

the float is large in size;
a feeder with hooks by attaching it at a distance of 25-30 cm from the float;
large hooks hanging from the end of the fishing rod to hit directly into a cloudy cloud on the water;
a sliding sinker installed just above the float, which will serve as an anchor.

It’s not difficult to assemble such gear:

thread the weight through the main line;
string a float and a stopper onto the fishing line;
attach the crusher with the bead;
tie a silver carp stick;
pick up a feeder (filled with technoplankton) with hooks;
equip the tackle with a spring;
bring the leashes out from the stick.