FishMagnit - Electronic fish bait - Fishing

The secret to the effectiveness of electronic bait

Despite the wide variety of electronic baits, the principle of their operation is based on the capture of sound vibrations by fish. Ichthyologists have found that fish sense wave vibrations in the aquatic environment in the range from 13 to 25 Hertz. High frequencies in the range of 16-25 Hertz are picked up by an organ located in the fish's skull, which is connected to the auditory nerve. At low frequencies, which are located in the range of 13-16 Hertz, vibrations are perceived by the lateral line of the fish.

When the device is immersed in water, the contacts automatically close. The resulting sounds, vibration and light emissions from the device attract the attention of fish, and they begin to circle around this place. After removing the device from the water and drying, it automatically turns off.

FishMagnet – Electronic fish bait

A new product from a domestic manufacturer, which has just appeared on the Russian market, has already received positive reviews from both professional fishermen and amateur fishermen. And this is not surprising, since the production of “FishMagnit” was based on the American device “Fishmax”.
OPERATING PRINCIPLE:
When immersed in water, an electrical signal passes between the contacts and FishMagnet begins to work. The FishMagnet electronic bait is a complex electronic device that affects the sensory organs of fish in four different ways: vibration, light signal, weak electric discharge, sound signal.
Vibration: the FishMagnet device generates vibration, which, spreading in the aquatic environment, affects the “side line” of the fish;
Sound signal: the sound signal emitted by the bait, selected during long experiments, spreads in the water over a distance of 500-900 meters, is especially useful when using FishMagnet in cloudy or completely opaque waters;
Light signal: periodic flashing of a bright LED directly affects the vision of fish and will be especially effective at night or in clear rivers, where noise from the current can muffle the effect of vibration and sound signal;
Weak electric discharge: a pulsed electric discharge acts on the nervous system of fish and, in combination with other signals generated by the FishMagnit device, creates the effect of a small feeding stand of young animals, which attracts fish located in the FishMagnet action area.
Use “FishMagnit” to lure a predator out of the reeds, raise fish from the depths, or simply save yourself from constant movement - “FishMagnit” will lure the fish to where you settled for fishing.
APPEARANCE AND EQUIPMENT:
FishMagnet is made in the form of a silver cylinder. At one of the ends of the cylinder, let's call it the working surface, there are electrical contacts, a special LED with a light wavelength corresponding to the red color, and a loop for attaching FishMagnet. The opposite side of the device is closed with a sealed lid, under which a replaceable battery is hidden. FishMagnet has positive buoyancy; for diving it is necessary to use additional weight. The kit includes the FishMagnit device, an additional replacement cover, instructions and a transparent case for storing FishMagnit.

Electronic bait from a Russian manufacturer

Based on American bait, several types of bait are produced in Russia under the general name “Fishmagnet-2”. Made in the form of a cylinder with colored plugs, it is equipped with electrical contacts made of galvanized metal. Depending on the availability of functions, “Fishmagnit-2” can be produced in economical, standard or luxury versions. The “Super Bite” electronic bait, reviews from amateur anglers about it are very positive, is a unique device that is effective for use in summer and winter fishing.

Electronic bait

Sometimes feeding is quite tedious and difficult, especially in the field, when there is no opportunity to do it fully. It is for this purpose that the electronic bait “FishMagnit-2” was developed, which will undoubtedly become a new milestone in the history of fishing.

This device is a small device similar in appearance and size to a battery. But don’t be fooled by its small parameters - this bait is capable of attracting fish using four influences at once, from acoustic and light to mechanical and electromagnetic.

How does an electronic device attract fish?

The “Super Bite” electronic bait is simple and effective.
After lowering the device into the water, it turns on automatically. “Fishmagnet-2” begins to make strange sounds for humans, vibrate and glow. Thanks to a complex of radiation, different organs of the fish are affected. Unlike conventional bait, which activates taste buds, electronic bait sharpens other types of nerve cells.

The flashing LED attracts the attention of fish in turbid waters or in noisy river areas. Light radiation is especially effective at night.
A sound signal of a certain frequency is felt by fish at a distance of 900-1100 m from the fishing point.
During operation, the bait sends vibrations that are caught by the lateral line of the fish.
The weak electromagnetic signal generated in the device irritates the nerve endings of underwater inhabitants.

Thanks to the volumetric effect on different organs of the fish, it is possible to attract large schools at a distance of 1-10 m. There should be some kind of edible bait on the hook in this place.
After removing the electronic device from the water, it must be dried or wiped with a dry cloth. Only then will the device automatically stop working.

Principle of operation

After diving, the bait should start working automatically. It will be “turned on” by water, a current conductor. The device emits weak signals, but sufficient for luring. It is believed that fish have five senses. Electronic bait affects three of them:

"Sideline" This is achieved due to the distributed vibration.
Hearing. Most models use only low frequency sounds. The developers believe that they are more efficient. In fresh water, the acoustic signal operates at 900 m, in sea water at 1100.
Vision. The LED flashes and attracts fish. Particularly effective in the dark. If the current is strong, the sound of the water weakens the vibration and sound of the device. Then the light signal comes to the fore.

As a result, the fish is “suggested” where to swim. Then various tackles are used. This bait turns off if you take it out of the water and wipe it.

What is the “Super Bite” electronic bait?

Some fishermen who purchased the electronic device “Super Bite” or “FishMagnet-2” began to call the new product a firecracker.
The fact is that in appearance, a domestically produced fishing bait strongly resembles a popular New Year's toy.

The red cylindrical body has side plugs. One of them is painted red, and the other is painted black.
Electrical contacts are built into the red plug ; they are also marked in black and red. This is done so that when recharging the user does not reverse the polarity of the electrical terminals. The red cap is also the light-emitting part of the bait.
The black plug is the negative terminal. It has a built-in ring for fastening with a fishing line.
The electronic bait “Fishmagnit-2” is equipped with a charger and an instruction manual for the device.

Performance characteristics

The device is powered by a battery charged from a 220 volt network. The recharging process takes place within 50-60 minutes, after which it can be used once for fishing. If the device is completely discharged, a full charge cycle takes about 8 hours. After this, Super Cool can work without interruption for about 200 hours.

The radius of action of the electronic bait declared by the manufacturer is from 300 to 1100 meters, depending on the composition of the water. Super Bite can demonstrate its greatest effect in salty sea water.

During operation, it is recommended to protect the device from shocks and falls, and store it only in packaging made of insulating material to avoid short circuits and unexpected discharge.

Features of the impact of signals on fish

It is water that activates the device, because as soon as the device is lowered into the aquatic environment, it begins to emit light, vibrate and click. Thus, fishing affects the visual and auditory analyzers of fish.

So the impact is:

Light. When the device gets into the water, it begins to flash, thus arousing interest among the inhabitants of the aquatic world. This function is especially appreciated during night fishing or in reservoirs with strong currents.
Sound. The device has low frequency sound waves. This looks especially impressive in muddy water. The speed of sound in fresh water has a speed of 900 m, and in sea water it travels 1100 m.
Vibration. It affects the “lateral line” of fish.
The low-frequency electrical impulse that occurs at the moment of casting has an irritating effect on the nerve endings of representatives of the aquatic world.

Self-production

Despite its apparent complexity, such a bite activator can be made with your own hands. Of course, it is unlikely that it will be possible to copy a factory bait with its four-factor effect without the presence of original components, however, if the angler has the skills to work with circuits, he will be able to make some similarity. To do this you need:

Solder a suitable circuit for the device.
Choose the most airtight container for the case. This could be a jar of medicine, vitamins, photographic film, or any other tightly closing plastic container.
Select a suitable audio device. The easiest way to use electric squeakers is from old children's toys - you can also borrow LEDs from them.
Solder the speaker and diode to the board.
Solder two power wires.
Place the board in the case from the bottom, and separate the top part with a foam pad - the compartment with the lid will be used for the battery.
Route the power wires through the foam plug and into the battery compartment.
Drill small holes in the bottom for the contacts and LED.
Insert the diode and terminals into the holes and securely insulate them with sealant or glue.
Attach a small loop or hook to the reverse end for the line and sinker.
Connect the battery to the ends of the wires, screw on the cap and throw it into the water.

On the Internet you can find a huge number of different electronic bait schemes, invented by fishermen and even copied from the original.
In this case, only the search for elements and direct production can become difficult. As you can see, self-production is quite possible if the angler has the skills to work with diagrams and a small amount of imagination.

Usage

Working with such super bait for fish is quite simple. First, you need to determine in which layers of water the fishing will be carried out - the location of the device will depend on this. If you plan to use surface baits, just tie the Super Bite to a fishing line and throw it into the water near the fishing spot - it has positive buoyancy, so it will float on the surface in a horizontal position.

If the angler wants to use deep rigs, in addition to the fishing line, a small weight is attached to the suspension of the electronic bait, due to which it sinks to the bottom. Occupying a vertical position, it begins to lure fish from the immediate vicinity of the reservoir to depth.

Some fishermen surround the Super Bite bait on both sides so that with the flickering LED it attracts fish standing at the bottom.
However, the manufacturer claims that its position in space does not affect its performance. Catching fish with WD-40 Some fishermen surround the Super Bite bait on both sides so that with the flickering LED it attracts fish standing at the bottom.
However, the manufacturer claims that its position in space does not affect its performance. Fishing with WD-40 If fishing from ice or from a boat, you can control the depth of the bait by unwinding the required length of fishing line and securing it. When fishing from the shore, you can experiment with weights and floats, but the manufacturer claims that the Super Bite does not need to be placed at half-water and it also works successfully in two extreme positions.

Once the bait is in the pond, the angler just needs to start fishing. No additional actions are required from a person to turn on the device - it is automatically activated when it gets into water by closing the contacts. In order for it to stop working, it must be pulled ashore and wiped dry. This system was invented to increase reliability - the absence of any buttons and moving parts on the body made it possible to completely seal it in plastic, which made it airtight and protected the inside of the device from water ingress.

The contacts need to be cleaned from time to time with a stiff brush if plaque forms on them. If you do not do this, not only the appearance, but also the effectiveness of the Super Cool will deteriorate.

The bait operates from a battery, which can be charged with a special device included in the kit and connected directly to the external terminals. There are also no connectors on the case to prevent moisture from getting into them and causing short circuits.

Important! It is necessary to connect the charger to the terminals before connecting it to the network, since touching the exposed contacts can be life-threatening.

In order to charge the device, you must:

Connect the black clip to the contact on the black end of the bait.
Connect the red clamp to the terminal on the red side.
Check the reliability of the fastening and remove your hands from the contacts.
Plug the charger into a power outlet.

In this case, it is important to observe polarity when connecting the charger - for this, all contacts are color coded. If you mix up the sides of their connection, there is a high probability of simply damaging the device.

Under different conditions, the main effect of electronic bait is achieved due to various factors. For example, in turbid water, fish react especially actively to the vibrations it senses through the lateral line. This is very important, since during periods of spring floods, due to rising turbidity, the bite is usually practically zero. Vibrations also have the same effect.

The flickering of the LED is especially noticeable for fish at dusk, that is, just at dawn and sunset - at dawn. Impulses, in turn, can stir up passive fish that are not interested in other influencing factors.

Effective or not

The main factors that influence the effectiveness of this device:

Seasons. As described above, it works best in winter and summer, a little worse in spring and autumn.
Fishing gear used. Naturally, without high-quality equipment and gear, it will not be possible to catch a trophy fish using only the “Super Bite” bait, so the fisherman must carefully select a good rod, line, reel and all additional elements.
The type of fish desired to be caught. It happens that electronic bait simply does not work on this or that fish, or the fish itself simply does not pay attention to it, so the fisherman must understand in advance who exactly he wants to catch, and based on this, select gear and bait.
Temperature in the reservoir. If it is very cold and the water is not warm enough, then even such a bait will not be able to lure out many fish. If the water is warm, then, as practice shows, the fish respond more readily to the operation of this device.

Description of the bait “Super bite”

Like all other electronic baits, this device is a cylinder painted red. The cylindrical body is closed on both sides with red and black caps. The red cap contains electrical contacts, one of which is the positive terminal. The surface of this cap is a light-emitting element. The negative terminal is located on the other side, on the black cap. The fish bait “Klev” (electronic) has a ring located very conveniently for attaching to a fishing rod. The electronic lure comes complete with a charger and instruction manual in a bright cover. A special weight is attached to the bait, with its help it is immersed in the water.

Subtleties of using "Fishmagnit-2"

To lure fish, an electronic device can be lowered to the bottom of a reservoir or placed on the surface of the water surface. For example, when fishing for bottom fish, the bait can be used as a main or additional sinker. If mining is carried out in the upper horizons of the reservoir, then the “Super Bite” can be mounted to a float or attached next to it.

At the fishing stage, it is important to correctly select the depth of the electronic bait depending on the season and weather conditions. Then the effectiveness of using “Fishmagnit-2” will be maximum. It is also necessary to take into account water parameters such as density and temperature.

Particular attention should be paid to connecting the device to the charger. The manufacturer prudently painted both the contacts on the bait and the clamps on the power supply in red and black. So for proper connection, you need to attach the red clamp to the red contact, and similarly connect the black elements.

general description

"FishMagnit-2" is an electronic bait. Invented in Finland, made in Russia. The previous version, FishMagnit, is more than ten years old.

It is a cylinder with red and black caps at the ends. There are galvanized steel contacts on each side. They are also used for charging.

The manufacturer's website lists many benefits of the product. These include modern bait. There is no need to throw cake, bread or anything else into the water to attract fish. The device is powered by a built-in battery. The declared range of action is 900-1100 m. Interested fish should swim at a distance of 3-15 m from the bait. It is affected by three types of signals at once:

sound,
vibrating,
light.

The intensity and strength of each can be adjusted. There are special jumpers for this. The bait, according to its creators, is suitable for fishing in almost any conditions:

in weak and fast currents,
in poor visibility, for example in fog or at night,
in both fresh and salt water,
in any weather: summer and winter.

The bait is used both on the surface and at depth. In the latter case, use the weight included in the set.

Operation of the “Super Bite” bait

In order for the fishing process to be successful, you need to know some secrets and operating rules:

During operation, you must treat the product with care, protect it from strong impacts and excessive temperature changes.
If the structure was previously used for fishing in sea water, before using it in a freshwater body, it must be washed with fresh water, otherwise fishing may not be successful.
At the end of fishing, you need to dry the device.
If you plan to use it for the first time, you must fully charge the charger.
The device must be stored exclusively in its packaging.
With a fully charged battery, it is possible to fish for 200 hours.
It takes less than one hour to charge the device.
To prevent the formation of deposits on electrical contacts, you need to clean them with a stiff brush - this will preserve the function and appearance of the structure.
It is up to the fisherman to decide whether to trust an electronic bait or choose a time-tested home-made bait, but if all the requirements are met, you can ensure yourself a fairly good catch, which may have never been achieved before.

Circuits for making electronic fish baits with your own hands

If you want to check for yourself the effectiveness of an innovative method of luring fish to a fishing point, but do not have the opportunity to spend money on buying a ready-made device, make it yourself. Homemade products will not cost that much, and the selected working scheme will help you avoid mistakes when choosing the necessary elements.

Option #1

The inhabitants of the underwater world react sharply to low and high frequencies transmitted in the water surface over long distances. This is how some individuals learn that a flock is feeding somewhere, as they pick up high-frequency sounds. To imitate this effect, you can create a simple bait with your own hands.

Acoustic electronic lure circuit

The main elements are:

pause duration multivibrator (it also sets the frequency);
short pulse shaper;
resistors, including a variable one, responsible for frequency regulation;
telephone capsule (or any other with a resistance of 50 ohms).

Assembly Tips and Instructions:

It is necessary to separate the tracks and solder all the necessary radio elements according to the diagram.
Find the optimal housing for your homemade project. As a universal option, you can use plastic vitamin jars.
Place the capsule with the speaker into the jar and seal it. Solder the wire coming from it to the board.
Using electrical tape or hot glue, we attach weights to the jar, which will allow the structure to be held under water.

For additional savings, you can avoid installing a power switch. After use, it will be enough to disconnect (pull out from the connectors) the power source manually.

Option No. 2

Another option is an acoustic bait that makes sounds similar to the natural croaking of frogs. The circuit runs on just 3 batteries and is extremely easy to assemble.

Diagram of a croaking acoustic electric bait

Variable resistors are responsible for setting the sound parameters. The emitter can be a simple earphone from a telephone, which is specially modified for immersion in water (sealed in the case, as in the first option). For efficient operation, a second one is placed in parallel with this earphone in the circuit (it is important that its resistance is at least 50 Ohms), it will also be used for control.

The application is quite simple - the earphone in the case is lowered into the water and the device is turned on in cycles of 7-15 seconds with the same break. It is not afraid of temperature changes and can be used in summer and winter fishing.

Electronic fish bait “Fishmagnit-2”: reviews

There are already quite a lot of fishermen who have purchased the FishMagnit-2 electronic bait. The cost of the product today is about 1,500 rubles, so even poor amateurs can afford to conduct independent tests. Reviews from those who have purchased the device vary greatly. There are categorical opponents of electronics, and some amateurs claim an increase in catch compared to previous fishing trips.

Experienced fisherman Vladimir purchased a standard electronic bait and decided to conduct an independent test. He went with his brother to the nearest lake to catch crucian carp. A relative attracted fish using homemade bait, and the owner of the miraculous device lured crucian carp using FishMagnet-2. Fishing took place at a distance of 20 m from each other. The result plunged Vladimir into deep despondency. His brother caught him not only in terms of the number of “goals”, but also in terms of trophies. For this reason, the author does not recommend purchasing an electronic pacifier.
At the same time, the fisherman with the nickname NIK TURUHAN speaks positively about the new product. The tests were carried out in harsh winter conditions of the Krasnoyarsk Territory. The morning catch of burbot exceeded all expectations, although the bite in the evening was poor. It is likely that weather factors still have a greater impact on underwater inhabitants than an electronic device. But under stable atmospheric conditions, fish are caught regularly, which brings joy to the angler.

Caring for electronic bait

The service life and efficiency of electronic bait often depends on proper care of this device.

How to handle the “Super Bite” bait:

Before first use, you must charge the device 100%.
When using the device, you must avoid low and high temperatures, as well as force.
After using bait in salt water, you must immediately rinse the electronic device with plain water.
Always wipe the device dry after each use.
When the bait is not used for its intended purpose, it should always be in its original packaging.
If any deposits appear on the contacts of the device, be sure to clean them with a stiff brush.

Reviews of electronic bait Super bite

Reviews from fishermen who have used it are mostly positive. It is especially praised by those who like to hunt predatory fish such as pike or perch. Negative reviews are written by those who did not understand the device itself, who could not find the right approach to it.

That is, they were unable to choose the correct diving depth, which is quite difficult to do, and this skill comes with experience. Also, some reviews write that the bait does not work from the first day of use, which may indicate that it is damaged, because the device should not hit the water or the bottom of the reservoir.

Igor writes that he started using this bait from the first day he heard about it. He is very pleased with the purchase, as the bite has really increased, there are a lot of fish, just have time to pull them out. I recommended it to all my friends, there is not a single one who regretted buying the super bite.

Andrey writes that he uses bait on night fishing, when it is very difficult to lure fish. It works great, the fish comes, all you have to do is catch it.

Maxim writes that he used it several times, and it got a bite every time. Moreover, those who were sitting next to me had a much worse bite than me.

Anton writes that after one trial use, he can’t give up the super bite, because you can’t fish without it. The catch is huge, there are specimens weighing 6-8 kilograms.

Kostya writes that the first time he chose the depth unsuccessfully, so the efficiency of the work was low. But, after several test casts, I got used to it, and things went smoothly.

“Super bite” electronic fish bait: reviews

Many fishing enthusiasts managed to test the new electronic product on reservoirs.

Consumer reviews are quite ambiguous, although in each specific case it is necessary to deal with the cause of the lack of bites on an individual basis.

Novice fisherman Alexey considers electronic bait complete nonsense. While fishing, he observed the opposite picture. For some reason, the fish began to bite only after Fishmagnet-2 was removed from the water.
But the experienced fisherman Fedor was given the device by a fellow hobbyist. Testing this coming weekend showed the device to be highly effective. Fedor was pleased with the electronic bait.
Oleg, a fishing enthusiast, observed an interesting picture on the pond. His friend arrived at the lake with an electronic novelty. Compared to neighboring fishermen, his catch was much better.
Vovan believes that many simply do not know how to use the device. It was only on his third fishing trip that he revealed all the secrets of its use. The fisherman advises that the main emphasis be placed on selecting the immersion depth of the electronic device.

Blitztips

It is advisable to transport this device in a special packaging box so that it does not break during transportation or any part of it is damaged.
You should always take the charger with you, or charge it immediately before fishing.
At home, before fishing, it is recommended to check the electronic bait. It needs to be lowered into a container of water and the bait should start flashing. This will indicate its serviceability.
You should not lower the bait directly to the bottom, where there is a lot of silt, as it will interfere with its work.
The location of the device, depth and distance must be selected by each fisherman separately, depending on the season, the gear used, the specific reservoir and the type of fish caught.
The bait must be infested very carefully so as not to break its feeding “nest”. If it is not connected correctly, it will eventually break.

Sources

https://FB.ru/article/176276/elektronnaya-primanka-super-klev-otzyivyi-ryibakov
https://pike-fish.ru/snaryazhenie/super-klyov-elektronnaya-primanka-dlya-ryby-chto-govoryat-o-nej-professionaly.html
https://intellifishing.ru/nasadki/primanka-ryby-super-klev
https://poklevok.net/dev/signalizotor/primanka-super-klev.html
https://prostokaras.com/kuhnya/prikormka/super-klev.html
https://intellifishing.ru/nasadki/elektronnaya-primanka-ryby
https://bolshoyulov.ru/elektronnaya-primanka-super-klev-otzyvy-rybakov/
https://bolshoyulov.ru/delaem-osobuyu-primanku-dlya-ryby-super-klev-svoimi-rukami/