Multiplier reels for trolling

"Trolling reel" Trolling fishing differs favorably from spinning fishing in the ability to use large baits, which significantly increases the chances of catching large fish.

"Trolling reel"

In order to successfully fish on the track, you need to use special gear.

Spinning rods for trolling should be much more powerful than rods used for casting.

The same applies to the coil.

It must be powerful, strong and durable. In this article I will tell you what you need to pay attention to when choosing a trolling reel.

Trolling Reel - Which Ones Are Best?

Meat grinders are the least suitable for fishing on the track. Due to the complex system of transmitting force from the handle to the rotor, meat grinders have lower power and wear resistance.

Even very high-quality spinning baits will not be able to withstand the high loads that accompany fishing with heavy and stubborn baits.

The mechanism will very quickly begin to play, and critical wear will appear on the gears.

Sooner or later, the trolling reel will fail the angler at the most inopportune moment.

But in inertial and multiplier reels the transmission is direct, the cord is wound directly onto the spool. Therefore they are more reliable. For trolling you need to choose exactly these tools!

The final choice of gear depends on the financial capabilities of the fisherman. If you need to assemble a good, reliable trolling kit for minimal money, I advise you to opt for a regular inertia.

It costs 400-700 rubles. There are more expensive models, the price of which reaches 2000 rubles. But compared to the price of more or less normal cartoons, this is not much. Inertial coils are simple, reliable and powerful.

"Trolling reel"

An angler who fishes by trolling does not even have to learn how to cast - when fishing on a lane, the bait is lowered into the water not far from the boat, and the line is released as the craft moves.

Fishing contains elements of spinning fishing techniques.

Some professionals and trolling enthusiasts use thin steel wire instead of fishing line or cord. Its advantage is that, with a minimum diameter, the steel has the highest strength.

If you also want to try a steel roller, then equipping the good old Nevskaya gear, or a more modern analogue, is the only solution. If your financial ability allows you to spend more than 3,000 rubles on the purchase of a reel, I recommend equipping your trolling spinning rod with a multiplier reel.

Fishing will be much more comfortable than with a spinning rod. Nowadays you can find a variety of cartoons on sale, so the fisherman often has the problem of choice.

What should you pay attention to when choosing a multiplier for line fishing?

The main selection criteria are:

1. Type.
2. Bobbin capacity.
3. Gear ratio.
4. Handle position.
5. Availability of a counter.

Let's go through each point in detail.

Advantages of baitcasting reels for trolling.

Now let's return to the situation when trolling is conceived as the main method of fishing. In this case, according to the author, the choice is better to make in favor of the animator. But since multipliers can also be completely different, it should immediately be noted that multiplier reels for trolling

1. firstly, they do not have a low profile,
2. secondly, they do not have a dynamic brake. A trolling multiplier does not need this brake; the bait is either simply lowered onto the water by the rod, or a minimal cast is made, during which the rotation of the drum is easy to control.
3. Multiplier reels are also quite attractive for trolling because they have a line counter. Certainly,

the light did not converge on it like a wedge, but with a counter it is much more convenient to control and vary the distance of releasing the bait. In addition, among the models of trolling multipliers, you can choose one in which the line counter can be removed if necessary. Since an extra element in the form of a counter means additional weight of the coil, which is not always convenient.

Bobbin capacity

This setting determines how much line can be wound onto the spool. It also directly affects the overall dimensions of the coil.

You need to choose the capacity of the cartoon based on the tasks that you set for yourself.

If fishing will take place on small rivers, with maximum depths of up to 10 meters, you can completely get by with a reel with compatibility 0.35/200 (200 meters of fishing line, 0.35 mm in diameter).

But if you fish in large bodies of water with great depths, and hunt for giant fish, you need to choose reels with a capacity of 0.50/200 or even 0.65/200.

Popular reel models

Next, let's talk about the undisputed leaders in the trolling reel market, which are rightfully considered the best in their segment:

Daiwa. The most budget model, which can be described as an ideal price-quality ratio, is the DAIWA “Millionare” S250. The clutch is designed for a static load of five kilograms, the reel material is metal. This budget winch will allow you to cope with both small pike and huge catfish. The weight of this reel is 285 grams, the gear ratio is 5.1. The average price on the market is 6,000 – 7,000 rubles. Daiwa Saltist LW is the flagship model. This reel has a number of advantages: low and high gears, very precise and smooth drag adjustment, line counter, cast aluminum body. All parts, down to the last bolt, are made of metal. She is not afraid of any extreme loads. Its average price is 22,500 - 27,000.

Shimano. Shimano TLD is a budget trolling reel, but despite its affordable price it has a number of options that are included in higher-class reels. Reduced and increased winding speed. Stainless steel gears, protection of the brake system from water ingress. Ability to work with a click bite alarm. Cost 7000 – 9000 rubles.

Shimano Talica 16 LBS 2 Speed, with this reel you can go for Nile crocodiles. Despite the fact that it is relatively small in size, it has excellent strength indicators. The speed selection system differs from budget options in that it is possible to switch to lower and higher speeds while reeling in fish. The housing and gears are made by injection molding. Cost from 24,000 to 27,000 rubles.

Abu. This is one of the oldest companies producing multiplier reels. Abu Garcia A20 LC 1124931 is a great example of an inexpensive and functional reel. The main mechanisms are made of brass, there is an audible bite alarm, and a line counter. The average price is 3900 – 4500 rubles. Abu Garcia Ambassadeur Moorum ZX1600 FW IVCB one-piece aluminum body greatly increases its reliability. This reel can handle the thinnest trolling lines and lines. The gaps between mechanisms and gears are minimal. The maximum load on the clutch is seven kilograms. Price 25,000 – 28,000 rubles.

Surf Master. A young company producing the most budget models. Surf Master Magnum MAG, body made of impact-resistant composite, metal handle, gear ratio 4:1. This reel is perfect as your first trolling reel. Price 2400 – 2800 rubles. Surf Master Sea Pro 9000 8bb, a power reel that can handle the biggest pike. Eight ball bearings ensure smooth running and the ability to withstand heavy overloads. Price 3200 – 3800 rubles. These reels may not be as durable as their branded counterparts, and they don't have as many options or adjustments. But as a first reel they are ideal.

Gear ratio

The smaller the gear ratio, the greater the traction force the mechanism has. Therefore, when choosing between a fast and slow cartoon, you should give preference to the latter.

TYRNOS 2

The optimal gear ratio is from 4.2 to 1 to 5.3 to 1. Some models, such as Shimano TLD and Shimano TYRNOS 2-speed, have a transmission - a mechanism that allows you to change the gear ratio.

This is very convenient, but such cartoons are very expensive (from 9 to 30 thousand rubles, depending on the model).

Multiplier reels

Read more

The need to buy a multiplier reel arises among experienced fishermen who need a device that combines the properties of inertia-free and inertial analogues. Multiplier models have a wide gear range, so you can find among them fast “meat grinders” and powerful winches for methodically pulling out trophy fish. Some models are equipped with 2 gears, which allows you to combine fast retrieving and power fishing with one tackle.

Basic characteristics

Multiplier reels from Shimano, Daiva and other manufacturers in our catalog have gear ratios from 3.8:1 to 6:1. In addition, marine models usually have a speed switch. That is why this type of reel is called multiplier.

Design Features:

• The reel has a mechanism that disconnects the gearbox and the spool when you press a key or lever. This allows the spool to rotate freely when casting the tackle.
• To prevent the line from being wound in the opposite direction during casting, a braking system is used. It can be permanent and progressive. In the first, the braking force is fixed by the fishermen, and in the second it is proportional to the speed of rotation of the spool.
• Friction washers are mounted on the handle axis and act directly on the transfer wheel. Over-tightening the clutch may damage this part.

Reels for fishing by casting from a boat or shore weigh 200-300 grams. Lightweight models for power fishing - 300-700 g. And for catching trophy predators, you can buy a multiplier reel for trolling with a wobbler, which weighs 900-1500 g.

Classification

Casting reels are divided into two main types:

• so-called soap dishes with a lightweight, streamlined body for working with baits weighing 1-28 grams and thin fishing lines;
• barrel-shaped models for baits weighing 7-60 grams.
• For power fishing, models of greater weight and power are selected:
• light trolling reels with 40-100 g bait;
• middle class trolling multipliers for bait weighing 100-150 grams;
• for fishing with bait weighing 150-200 grams, a trolling reel with a heavy-duty counter is suitable;
• for vertical fishing, light reels with baits up to 400 grams are used;
• the middle class of reels for vertical fishing is designed for baits weighing up to 600 grams;
• For vertical fishing with heavier baits, heavy “mults” are recommended.

Now manufacturers, in an effort to take care of all their customers, are producing baitcasting reels for the left hand. In our catalog they are represented by the Stinger Powerage 40 LTSL, Okuma Citrix LP Cl-364Xa and Shimano Cardiff 401A models.

Advantages of baitcasting reels

• Great power at moderate weight.
• Long service life even with intensive use.
• Affordability in comparison with other types of coils with the same power.
• Thick fishing lines do not interfere with long throws.
• Simple and sensitive wiring control.

The disadvantages of multipliers include incompatibility with light baits and possible problems during the first operating experience (beards). In addition, a regular fishing rod is not suitable for spinning fishing with a multicast rod; you need to buy a casting spinning rod. Of course, you can try to remake a regular fishing rod, but its functional qualities will decrease.

Recommendations for selection

• Low-profile models (“soap dishes”) are suitable for jig fishing in shallow waters. On rivers with strong currents and large reservoirs, it is better to use barrel-shaped “mults”.
• A reel with a counter is an optional, but extremely useful attribute for trolling fishing.
• It makes sense to buy a casting reel with a composite or carbon fiber body, since the weight of the reel is important for casting.
• A reel with a line guide handles the line more carefully, so both components of the equipment last longer.
• The presence of 6 weights in the braking system will allow you to change them in the process of adjusting the multiplier to the weight of a specific bait.
• The diameter of the fishing line must correspond to the parameters indicated on the reel so that the cord does not get stuck between the spool and the body, and also does not create unnecessary load on the braking system.

In our catalog you can choose and buy a reel for trolling or casting fishing from reputable manufacturers Shimano, Okuma, Stinger, Trolling Master and Daiwa. A multiplier reel will cost from 4 to 18 thousand rubles, depending on the materials of manufacture, power, estimated traction effort and other characteristics.

Availability of a counter

In trolling fishing, it is important to remove as much line from the spool as required by the depth in the fishing area.

Measuring fishing line “by eye” is problematic, counting revolutions takes a long time. Therefore, many multiplier trolling reels are equipped with line counters. I recommend choosing these models.

The counter significantly simplifies the fisherman’s life and saves valuable time. There are counters both on expensive coils from well-known companies and on fairly cheap products.

Counter on equipment

Many models of cartoons for fishing on the Surf Master track have a counter, although the cost of this gear does not exceed 4 thousand rubles.

Basic requirements for a trolling reel

It is not without reason that the reel for trolling fishing received the slang name “winch” from fishermen. The most important requirement for a reel is high reliability. During trolling, all the gear experiences a lot of stress, so each part of it must have a fair margin of reliability. It is very important that the clutch setting is as accurate as possible.

It should hold the line while the boat is moving, preventing it from unwinding, and when biting or hooking, on the contrary, release it from the spool, reducing the shock load on the rod. It is very important that the reel has power transmission ratios that will allow you to pull out a particularly large specimen without fear for the integrity of the mechanisms and components.

The material is predominantly metal, it one hundred percent meets all reliability requirements, but modern technologies do not stand still, which makes it possible to use composite materials, which have lower weight and high reliability. Another important point is the size of the spool; it must hold at least two hundred meters of cord.

The next thing you need to pay attention to is the line layer; it must be equipped with a bearing, which is necessary to prevent the cord from twisting. A recoilless brake is another important requirement. It will allow you to make instant cuts.

How to choose a trolling reel

Trolling is one of the most popular and effective ways of catching predatory fish. For successful fishing, you can use multiplier and inertia-free reels. Each of the described products has its own technical characteristics, strengths and weaknesses. Most spinners recommend using baitcasting reels, although some fishermen opt for inertia-free trolling mechanisms. In our article, we will look at the nuances of choosing the equipment described, dwell on the advantages and disadvantages of different types of reels, and consider their technical characteristics.

What to look for when choosing

The main requirements for trolling reels are considered to be sufficient strength or power . The fact is that such products must withstand significant loads, which will allow them to hook and pull out large predators. According to experts, the best choice would be a reel with a recoilless brake mechanism. Such reels instantly slow down the movement of the fishing line during hooking.

As we have already said, inertia-free and “multi” reels are most often used for trolling. When purchasing this product, you must pay special attention to the operation of the roller, which is used to lay the thread in the bobbin. It is desirable that this part be mounted on a bearing. In this case, the forces that lead to twisting of the fishing line during reeling are reduced.

Some fishermen use reels with a rear brake. Due to this mechanism, the intensity of braking of the clutch during fishing is regulated. The friction clutch is adjusted for force forces in such a way that with a small load the reverse winding begins to work. Particular attention is paid to the safety of the gear. The rod needs to be chosen correctly for a specific fish; it must have a certain margin of safety.

Basic parameters of a trolling reel

For trolling fishing, it is better to use a classic baitcasting reel. The first important point that you need to pay attention to is a high-quality and reliable friction brake, which significantly simplifies the process of landing fish and helps with hooks.

Fishing by trolling is accompanied by considerable loads on the reel, so the fisherman will need a model with a fairly powerful design. Also, a baitcasting reel intended for trolling must have a reliable braking system.