Home » Equipment and tackle

Hook Removal Tools

Yuri 11/11/2020 102

The arsenal of a novice fisherman is replenished with various devices every year. With experience, fishermen roughly understand what they need for comfortable fishing. How to remove a hook from the mouth of a predatory fish without damaging the trophy and your hands?

We recommend the yawner. It is, of course, not always relevant. For example, when catching peaceful fish it is not needed, but if the fish is predatory, then you simply cannot do without it. It is useful if you need to keep your fingers safe and sound, and your fish mouth safe and sound.

How to use

It’s easy to use the yawner, the main thing is to do everything strictly in turn. To remove the hook from the pike's mouth you need to:

Read also:  10 largest fish on Earth - their size will amaze anyone
  • take the folded yawner;
  • bring the ends into the mouth;
  • release the spring.

Next, using a lancet or extractor, the hook is removed from the mouth and the yawn is removed.

Victoria Leshchenko

I've been working hard in the fishing tackle department for the past six years. I can help you assemble almost any gear.

Ask a Question

Even when using a gaper, it is not recommended to put your hands into the fish’s mouth; sharp teeth can leave their mark even with a slight touch.



Hooks, extractors, yawners, kukans

Home → Fishing accessories → Hooks, extractors, yawners, kukans

Sort by: price name newness

forward→

forward→

The hook serves the same purpose as the landing net - to remove freshly caught fish from the water, but it is used only for large fish - salmon and catfish. It requires skill to handle it.

The extractor is specially designed to remove the hook from the mouth of a fish in cases in which it is not possible to do this with your fingers. This important detail must be included in a fisherman’s equipment.

A yawn is a spacer that is inserted into the mouth of a caught pike in order to remove the hook from the mouth without being injured by its teeth.

Kukan is a cord with a wire loop, designed, like a cage, to keep caught fish alive.

Selecting material for self-production

Many craftsmen make yawners at home in the required quantities and the required size. It’s not difficult to do it yourself, but you still need to have certain skills.

In addition to the ability to bend metal, it is important to choose the right material from which the product will be made. For a yawner, they usually take a spoke from a bicycle or steel wire of the required diameter. The main thing is that the selected material does not break or bend during use.

Additionally, for convenience, you can put a rubber or silicone tube on the place where your hands will be located when using the tool. In winter, this addition will prevent the skin of your hands from touching cold metal.

DIY making

For production, you must first stock up on the necessary materials. There are not many of them; many have everything in their garage or workshop. Everything you need can be presented in the form of a small table:

componentquantity
rubber tubeabout 10 cm
bicycle spoke1 PC.
paper clip1 PC.

The manufacturing process is simple, anyone can do it. You can make a yawner with your own hands like this:

  • using pliers on the knitting needle, make an incomplete turn exactly in the middle;
  • at the front ends, bite off all excess and bend it at 90 degrees;
  • the ends are processed with a file so that there are no burrs, this will prevent injury to the fish and the fisherman;
  • You can put a piece of rubber tube on the bent ends;
  • Use an unbent paper clip to secure the product, this will make it easier to transport.

This completes the process of making a pike yawn with your own hands.

Victoria Leshchenko

Read also:  Parameters and characteristics of spinning rods

I've been working hard in the fishing tackle department for the past six years. I can help you assemble almost any gear.

Ask a Question

It will be easier to bend the wire or knitting needle on the handle of a file or screwdriver. When working, you should be careful; low-quality metal may simply burst rather than bend.

The ends do not need to be covered with a rubber tube or bent at a right angle; they can be wrapped in the form of a spring. In this case, you do not need to put on the tube.

Hook Removal Tools

Date: July 6, 2021 | 440

It happens that the hooks dig into the edge of the mouth of the hooked fish. Then there is no problem - we can grab the hook with our fingers and release it. After which we release the fish, or take it as a catch and some culinary exploration. But there are often situations when the hooks of the bait dig deep, the whole bait can be in the mouth of the fish, and the hook is somewhere far away in the gills. The question arises: how to get a hook out of a fish’s mouth? You can't do it without special tools. And today, I will tell you about a set of tools that fishermen use to remove hooks from the mouth of fish. We will talk about gappers, extractors, forceps, clamps, pliers .

So, the fisherman hooked another predator that had its eye on the tasty edible silicone. The fish is already in your hands, or in the landing net. And the fisherman sees that only the leash is sticking out of the mouth, and the bait and hooks are somewhere deep, probably in the gills, or even the esophagus of the fish...

What should a fisherman do if he does not have any special tools with him to remove hooks from the fish’s mouth? You have to use improvised means. But a lot depends on what kind of fish was caught.

If it’s a perch , and it’s heavily eaten, then you can pick at it with your fingers... The perch’s mouth is large and not armed with teeth. But, it is important not to climb through the gills, otherwise you can cut your fingers on the sharp edges of the gill covers... Sometimes, without improvised means, it is not possible to release the hook.

In any case, if the perch swallows the bait like this, then the fish will almost 100% die. And there can be no talk of any “catch and release” here. The use of special tools to remove hooks from the fish’s mouth somewhat increases the “patient’s” chances of survival. But for now let’s look at other popular trophies of the jig spinner.

If you catch a pike , then the matter is generally gloomy, because... The mouth of this predator is hard and studded with numerous sharp teeth. Under no circumstances should you put your fingers into the mouth of a pike! So, if the toothed one has taken it deeply, and there are no special tools, then you need to use something clever from the means at hand. For example, you can cut or break out a couple of branches from coastal trees or bushes. One will serve as a spacer. You need to try to carefully insert it vertically into the pike’s mouth so that it cannot move its jaws. We climb into the gills of the fish with another, longer, possibly with knots, stick, trying to free the hooks. To make such an improvised yawner and extractor, you may need a knife.

If you come across a pike perch and swallow the bait deeply, then you shouldn’t put your fingers into the fish’s mouth. Of course, pikeperch fangs are not as dangerous as pike strings of teeth, but still, injury is very possible. Here you also need to open the mouth, fix it with a spacer and do some shamanism using improvised means to pick the hook out of the mouth. The same applies to catfish . You shouldn't put your hand into the fish's mouth. Although there are no obvious teeth there, there are so-called teeth. a brush that can also cause injury.

So, if the angler does not want to have big problems when the fish swallows the bait deeply, especially if the angler wants to release the fish alive, he should acquire a set of special tools for removing hooks from the fish’s mouth.

The simplest and most classic set for removing hooks from a fish’s mouth is a yawner and an extractor fork or a yawner and a surgical clamp .

Zevnik

A yawn is a special device that allows us to open and hold the mouth of a fish open while we poke around there, trying to free the hooks. Agree, trying to do something in this direction, with the mouth of the same pike tightly shut, is unrealistic.

The yawner is a structure made of thick springy steel wire. Here a spiral coil is wound as a spring element, and two horns are formed. At the ends of the yawning horns, to increase the area of ​​contact with the fish’s mouth (so as not to break through it), there are round knobs, or transverse bends of the wire itself.

Such a yawner can be bought in almost any fishing store. So, if you don’t have one yet, be sure to buy it!

Surgical hook removal clamp

When the fish's mouth is open and secured with a gaper, a surgical clamp can be used. Grabbing the hook, we pull it out of the mouth. A surgical clamp can be purchased at a pharmacy. To tell you the truth, I didn't really enjoy using the surgical forceps to remove the hooks. I prefer the extractor fork.

Fork Extractor

An extractor fork, or simply an extractor. In appearance, this tool resembles a knitting needle, a crochet hook or a thin screwdriver, with the only difference being that its end is shaped like a fork.

There are store-bought extractors. But some people make them themselves. It's not difficult enough. Using a file, you can grind out a good extractor from the same thin flat screwdriver, or from a duralumin knitting needle, with the end previously flattened on an anvil.

The fork is inserted into the open mouth of the fish and pressure is applied to pry up the stuck hook, releasing it from the tissues of the mouth.

The yawner is kept in the pocket of a fishing vest, or fastened to it on the outside. The same applies to surgical clamping. The extractor is stored in a special narrow pocket, or some kind of case or micro-tube is fitted for it, so as not to get pricked.

Fishing tongs and pliers

There are more advanced tools for removing hooks from a fish's mouth. These are various fishing pliers.

And pliers.

In addition to the hook removal function, these tools have pliers that can be used to cut fishing line, there are flat areas that allow you to straighten leads, clamp pellet weights and do a bunch of other little things. These types of tools are clipped onto a fishing vest and stored in chest pockets.

In fact, fishing tongs and pliers can also replace a yawner. But, more often, you have to use both, because... Not every fish can properly open its mouth with the ends of pliers.

In any case, in order to save time during pure fishing, in order to keep the catch alive, you definitely need to buy yourself one of the tools described above. Choose according to your taste and finances.

Share with your friends:

Categories: Equipment · Tags: Yawner, Hooks, Pliers, Equipment, Tongs, Extractor

Is it worth making it yourself?

Self-manufacturing of a gapper should be carried out by someone who has similar skills in working with metal. If you are new to this, then it is better to buy the product in a store.

Their cost is not high, and the hassle is much less. But it is worth remembering that a plastic yawn will have less weight, but in the cold this material is very fragile . And you can’t use it for a large pike; a toothy one can break it. Most often, purchased options are made of metal; you can modify it yourself at home if desired.

You can make a pike yawn with your own hands without any problems, the main thing is that you have the necessary materials and very little time. Every spinning fisherman should have such a product in his arsenal, and preferably more than one, but whether it will be purchased or homemade is up to everyone to decide for themselves.

You can ask your question to our author:

Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
You may also be interested
Options for pike hooks and rules for choosing them
DIY plywood canoe: manufacturing technology, tools and video
Types of leashes and hooks in feeder fishing
Offset hook
Tips for installing offset hooks
How many hooks can you have on a fishing tackle?
Features of self-made fishing hooks
Meet Dohitomi, a manufacturer of fishing hooks
Heat the needle in the flame.
Sharpening fish hooks at home
Selection of main line, leader and hooks
How to make a boat with your own hands: wood and plywood are a fisherman’s best friends
DIY plywood boat. Necessary materials and tools. Selecting a drawing and assembling the body
DIY folding boat
Homemade plywood boats: materials and tools, drawings and layout, hull assembly, gluing and painting
Which thread is better to plant a net. Features of equipping a fishing net are the correct fit and choice of net materials. Required tools and materials
Tips for choosing offset hooks for fishing with silicone baits
Для любых предложений по сайту: [email protected]