Which jig should you choose to catch crucian carp?

Fishermen enjoy fishing for crucian carp. They are especially attracted by catching crucian carp with a jig in the summer.

In this case, a person will not just need to sit on the shore and look around, but take active actions, on which the outcome of the entire fishing will depend. Therefore, before you take the product with you and go fishing, you need to learn about some important nuances that can make the process easier and the result much better.

How to choose a jig

A jig for crucian carp is selected taking into account several rules. It is a mistake to believe that you can take the first product you come across and go hunting for delicious fish with it. No, of course, it is not prohibited to do this, but most likely you will only be able to observe crucian carp in a pond, and not in your own bucket.

First of all, you should pay attention to the color. In the summer, it is best to take a closer look at products in dark colors, because it will be more difficult for fish to notice them in the water. The ideal option would be a black, marsh, gray, brown, green element.

Some fishermen do not understand what this is connected with, but everything is extremely simple. In the warm season, the food supply of crucian carp has a dark shade. The fish feed on various insects, worms and flies, which are not particularly noticeable in the water. Therefore, if you present a crucian carp with something lighter, it may get scared and no longer swim to the tackle. In this case, you can reel in your fishing rods and go home.

Important! There are rules when fishing and they must be followed if you want to catch anything.

Having sorted out the color, you can move on to the size. It is best if it is a small element with an elongated shape. The width of the product can be no more than 0.4 cm, and the length – about 0.5 cm.

It is best to pay attention to:

• Ant.
• A pellet.
• A drop.
• Oatmeal.
• Disk.

Despite the fact that the weight cannot exceed 5 grams, this does not stop anglers, and they use both lighter and heavier elements. It must be said that this actually works. The reason for this is that the reservoir is different. No one can argue with the fact that it can be shallow in one place, but on the contrary deep in another. On one the water is crystal clear, and on the other it is a real dirty slurry. The same applies to the current, bottom condition, fish activity and other important points. Therefore, where a light bait will work, a heavy one will be superfluous and vice versa.

Important! In deep water, it is advisable to catch crucian carp with a heavy jig so that it reaches the bottom faster.

If there is no bite at all, then it is recommended to change the product and take one whose weight is no more than 1 gram. The same applies to hot weather and clear water. Under these conditions, you can forget about heavy baits.

fishing line

The main requirements for a fishing line is the maximum load that it can withstand with a minimum thickness. Select a fishing line similar to the fishing line for winter fishing; a light jig should pull it under its weight. This greatly affects the entire tackle, directly on its sensitivity. It is worth choosing a thinner fishing line, so you can see the maximum number of bites.

Many fishermen use a rig with a leader. Catching crucian carp in the summer with a jig is no different from float fishing, and here the rein plays the same role; when hooked, it allows you to tear off one jig, and not the whole equipment, and is less noticeable to the fish.

Fluorocarbon fishing lines and the like are gaining popularity at high speeds. Like braids, they have a lot of power and are difficult to stretch. An excellent quality is invisibility in the water and the lack of memory in such fishing lines.

Choosing gear for summer jig fishing

If an angler is going to fish with a jig in the summer, then he will need to take care of assembling the gear. First of all, you should think about a light rod that would be easy to hold in your hands. Experienced people advise paying attention to a telescopic product with guide rings or a carbon fiber device. As for the length, it is selected solely based on the fishing characteristics. Fishing, which will take place from the shore, does not involve tackle longer than 5-8 meters.

Fishing from a boat requires you to purchase a fishing rod, the size of which will be less than four meters.

As for the coil, it can be either an inertial element or a regular one. The fishing line must be at least 30 meters. If an angler plans to catch small crucian carp, weighing up to half a kilogram, then he can easily do without a reel. Speaking in this case about fastening, it is worth noting that you can get by with a connector attached to the tip of the fishing rod.

It must be said about the inertia-free reel, which will come in handy when catching some large specimen.

Particular attention is paid to the bright nod . Often the element is several times longer than the winter version. It is best if the part is made of lavsan or other similar flexible material.

If fishing occurs on a windy day, you cannot do without using hard nods. That is why it is important to always have such details at hand.

Having approached the thickness of the fishing line, it must be said that the maximum cross-section cannot be more than 0.18 mm. It is not surprising that experienced fishermen use braided cord with a diameter of 0.1-0.12 mm. An undeniable advantage in this case is the relative invisibility of the part for fish, as well as reliability.

Speaking about tackle, it is also necessary to note one important point regarding hooks. Their size (according to the international classification) can range from No. 12 to No. 16.

Summer jig and methods of catching crucian carp with it

The first thing where it all starts is with the bait, which is thrown into the water. If you want, you can wait until the summer jig reaches the bottom. True, it is better for everything to happen smoothly, so it is advisable to slightly raise the rod and move it in different directions. Sometimes even at this stage the fish notices the artificial treat. As soon as the angler feels that the jig has reached the bottom, it is recommended to hide for a while. After this, the most interesting part begins - active play with bait.

Important! In summer, crucian carp react least of all to horizontal movements.

Therefore, it is best to tear the jig off the bottom a little so that it rises a little, and then send it back to its usual place. As for speed, it should be minimal. There is no need to jerk the rod back and forth, because such movements are unlikely to interest the fish. We should not forget about important stops to give time to the river inhabitants to look around and get used to something new.

Some fishermen work horizontally, convincing them that this way the jig for crucian carp will bear fruit in the summer. Of course, you can try to do this, no one forbids it. However, practice shows that horizontal movements give results in spring or autumn, but not in summer. In the hot season, the fish pays attention to vertical twitching, diagonal twitching, as well as slight vibrations of the nod.

There have been cases when crucian carp were attracted by what perch loves - sharp rises with a jig. Despite the fact that this is a mystery, if there is no bite, then you can still try this option.

You need to understand that large specimens, unlike small ones, react much faster to the game offered to them. In addition, it would not be superfluous to use attachments if something does not work out. This will definitely interest the crucian carp and make it sure to start pecking. This option is especially suitable on a river where there is a lot of silt at the bottom or the river is rich in vegetation.

Since we are talking about baits, it must be said that in the summer these can be plant baits or animals. As for artificial ones, this is already understandable; jigs are what they are used for.

And the real nozzles that will fit are:

• Maggot.
• Bloodworm.
• Pearl barley.
• Foam rubber.
• Styrofoam balls.
• A piece of a worm.
• Various insects.

Bait and feeding

The jig can be used with or without attachments. When using bait on a hook, it is better to string bait of animal origin. The use of other products may not bring good results, and the bite will be rare, even if the fisherman is armed with a super catchy rod. The following baits are suitable for effective fishing for crucian carp:

• bloodworms (2-3 pieces for each hook),
• maggot,
• worm,
• leech,
• dragonfly larva,
• grasshopper,
• bark beetle larva.

In winter, crucian carp are very picky eaters, so you can use a combination of several “ingredients” as bait, for example, bloodworms and maggots, mounted on one hook. You need to string the larva in the head area so that the tackle looks natural and does not spook the fish. The crucian carp will also pay attention to plant bait. Such food will attract small fish. Pearl barley, dough, and corn are perfect.

As bait, you can use special dry mixtures for crucian carp or crucian carp, sold in stores. Since crucian carp feed on bloodworms in winter, a handful of these larvae mixed with millet can serve as complementary food. You can prepare a paste to attract the attention of fish to the fishing spot yourself. To do this, mix breadcrumbs with flour and bloodworms. The finished mixture is mixed with water. Small balls are made from the pulp.

There is no need to overdo it with the animal component, as the fish may get enough and simply stop biting. A large number of bloodworms can attract the attention of perches. The bait is thrown into each hole; an active bite should be expected after 30-40 minutes.

Like any fish, crucian carp behaves carefully in winter; it can play with bait for a long time, so you need to fish it out carefully. Otherwise, the fish may fall off. The hook should be smooth and should be performed even with slight deviations of the nod. When the number of bites decreases, it is recommended to throw another ball of bait into the hole.

Do-it-yourself jig - how to do it

Making a jig with your own hands is quite easy. One of the simplest options is to connect a lead pellet and a hook, crimping the first with pliers, and then painting it in the color you like. Some people make jigs for crucian carp using a blowtorch. In order to do this, you need to solder tin just below the eye of the hook or onto it. Before this, you can wrap the forend with wire to make the product heavier.

There is another method that is used quite often. We are talking about cutting out an element from some non-ferrous metal. Brass, copper or stainless steel are suitable for these purposes. Next, you will need to clean it with sandpaper or a file. After this, a hook of the required size is soldered to the finished plate.

Although, as experienced fishermen say, all the methods described above are for beginners. If you want your fishing to be a success, then it is better to make the element conscientiously.

And for this, all manipulations are performed in the following sequence:

1. First, you need to stock up on acid, hooks (the size of which is in the range No. 12-No. 16), a soldering iron, oil, a rubber pin and fluoroplastic (this element can be replaced with another, but only one that can withstand high temperatures).
2. Using acid and a blowtorch, tin the ears of the hooks and forearm.
3. After this, you will need to pierce a piece of rubber with hooks and fix it so that the tinned part is free.
4. At the next stage, holes are created along the edge of the fluoroplastic plate; future products will directly depend on their shape. Therefore, there is no need to make them too large and deep.
5. Next, you will need to install the hook so that the top of the forend and the eye fall into the hole that is on the plate.
6. Afterwards you will need to heat up the soldering iron well, take the solder and use it to fill the hole on which there is a hook. While the solder is hot, it will need to be pierced with a needle.
7. After hardening, the needle will need to be carefully removed from the element by loosening it. This hole is needed for fishing line.
8. All that remains is to thoroughly clean the jig and then paint it.

What is the difference between winter fishing and summer fishing?

Some fishermen believe that catching crucian carp in winter with a jig is more difficult. Actually this is not true.

The main differences are as follows:

• Color selection. In summer, you need to choose dark jigs, while in winter, on the contrary, light ones.
• Rod length. In the summer, choose long, when fishing from the shore - medium, when from a boat - short.
• Technique of the game. In summer it is vertical, and in winter it is horizontal.
• Sweeping. In winter, crucian carp are most careful. In the summer you need to cut sharply.
• Fishing method. In winter, an ice hole is suitable, in summer - the shore or a boat.

Secrets of fishing

Fishing for crucian carp in winter is fraught with several secrets:

1. You can lure fish not only with bait, but also with bait. When the bite is weak, try slightly moving the float or nod. Crucian carp, feeling the movement in most cases, hurry up to grab the bait.
2. If the bite suddenly stops, don’t be lazy to make several holes 8-10 meters downstream.
3. Even the most effective bait does not always give results immediately after feeding.
4. The bite of winter crucian carp often looks like a weak twitch of a nod. The hook should be short but sharp.
5. You should fish slowly, given the thin equipment, the crucian carp begins to resist most of all when brought to the hole.

More often, the bite of crucian carp is of a wave nature. Several bites follow one after another, with a frequency of 5-10 minutes, then the bite subsides for a while. Bait allows you to shorten these breaks, and in some cases make fishing continuous.

The success of fishing is often determined by how quickly it is possible to detect a concentration of fish. They usually wait 10-15 minutes at each hole - there is no point in waiting longer. Therefore, it is better to fish with a group of anglers or rely on others.

Having found a catchy place, be sure to return there again. Crucian carp is constant, perhaps at some time it will not be there, but sooner or later it will return there.